LED Round Up/Down Canopies - Choose Your Options

LED Round Up-Light Canopy

Canopy lighting is typically used in commercial and industrial settings, providing much needed overhead light for walkways, entrance ways and mid to low level ceilings in enclosed areas. Simple in design, they create safely illuminated areas for work personnel and the general public alike.

Standard models of canopy lighting offer only downward lighting and this is what sets aside this model from the competition. With the uplighting option you can now illuminate areas of the premises that would normally be left in darkness when a canopy is mounted below the ceiling on a stem or beam for example. This uplighting can be used to showcase the architecture of the property or give the impression of a more spacious area. With a sleek modern design, it is ideal for not only upgrading light levels but for also transforming the aesthetics of a given area.

With ease of installation in mind this fixture has four ½ inch knockouts located around the housing to allow you to stem mount and allow conduit to enter the fixture for safe wiring. A surface mount bracket is also provided for ceiling and structure mount such as support beams. This allows fast and safe installation saving time and money on labor.

LED Technology far outlasts that of conventional options such as HID or halogen. Not only exceeding such technologies in life span (up to 5x that of HID) but also light output. This not only means less energy consumption initially but also longer periods of time without maintenance issues and with minimal loss of light output throughout its lifetime.

This fixture has a built wattage selectable switch allowing you to set the lighting levels to your property requirements. Secondly, you can also change color temperature with the flick of a switch to three presets allowing you to customize the look and feel of your property. Whether a commercial walkway requiring a warm welcoming sunlight effect, to a more clinical bright white light suited to industrial locations, this fixture can perform to the highest standard regardless of property type.

Features

• Low glare, prismatic polycarbonate lens
• Beam angle 150°
• Multi watt selectable
• Multi color temperature selectable 30K/40K/50K
• Precision sealed die-cast housing with high grade powder coat finish
• Four ½ inch knockouts located on four sides of the housing

Electrical

• Input voltage: 110-277VAC 50/60Hz
• Input current: 0.6A Max
• 0-10V dimming
• Rated IP65 for wet locations
• Operating temperature rating of 0ºF to 104ºF (-17ºC to 40ºC)
• CRI: 80
• LPW: 165
• ETLus rated

Warranty