TRIPP LITE Line Interactive UPS, Rack/Tower, Out: 127/120/110V AC , In:120V AC - SMART3000RMOD2U

Description:

Line Interactive UPS

Details:

Item : Line Interactive UPS | UPS Type : Line Interactive | Mounting : Rack/Tower | Input Voltage : 120V AC | Output Voltage : 127/120/110V AC | Backup Time (Half/Full Load) : 11 min/4 min | Transfer Time : 4 ms | Input Current : 24 A | Product Name : SmartPro SMART3000RMOD2U 3000VA Tower/Rack Mountable UPS | Load Capacity : 3000 VA/2880 W | Serial Port : Yes | USB : Yes | Plug/Connector Type : NEMA L5-30P | Receptacle Detail : 1 x NEMA 5-15R, 6 x NEMA L5-30R | Product Line : SmartPro | Network Management : SNMP Manageable | Package Contents : SmartPro SMART3000RMOD2U 3000VA Tower/Rack Mountable UPS, PowerAlert Software with USB, DB9 and EPO Cabling, 4 x Post Rack Mount Installation Accessories, Owner's Manual with Warranty Information | Hot Swappable : Yes | Software Included : PowerAlert Software | Emergency Power OFF : Yes | Form Factor : Rack/Tower | Certifications & Standards : UL1778, CSA, FCC Part 15 Class A, NOM | Typical Battery Recharge Time : 4 Hour | Additional Information : 2 x Front Panel Switches offer Power On/Off Control, Alarm Cancel, Self Test and UPS Voltage Configuration, Surge Suppression: 800 JoulesFront Panel LEDs: Utility Power, Voltage Regulation, On-Battery, Overload, Replace Battery, Site Wiring Fault, UPS Fault ConditionsAlarms: Power Failure, Overload, Low Battery | Low Voltage Transfer to Battery Power (Setpoint) : 90 | UPS AC Suppression Joule Rating : 800 | Battery Recharge Rate (Included Batteries) : Less than 4 hours to 90% (typical, full load discharge) | Battery Access : Front panel battery access door | Output Circuit Breakers : 15A (x2) - breaker 1 covers 2 5-15R outlets, breaker 2 covers 4 5-15R outlets, L5-30R outlet is unbreakered | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Output Voltage Regulation (Battery Mode) : +/-5% | Network Management Cards : SNMPWEBCARD; WEBCARDLX; RELAYIOCARD | Expandable Runtime : Yes | External Battery Pack Compatibility : BP72V15-2U (limit 1); BP72V28RT-3U (multi-pack compatible); BP72V18-2US (multi-pack compatible) | Output Capacity (Watts) : 2880 | Nominal Voltage Details : 120V default | Load Management Receptacles : Two switchable load banks - bank one consists of 2 5-15R outlets, bank 2 consists of 4 5-15R outlets | High Voltage Transfer to Battery Power (Setpoint) : 146 | Cooling Method : Fan | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | Nominal Input Voltage(s) Supported : 110V AC; 120V AC; 127V AC | Recommended Electrical Service : 30A 120V | Alarm Cancel Operation : Power-fail alarm can be silenced by pressing the on/test/mute switch | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 1601 | Primary Form Factor : Rackmount | Audible Alarm : Audible alarm indicates on battery, low battery and overload warnings | Power Factor : 0.96 | Site Wiring Fault Indication : Includes site wiring fault LED | Output AC Waveform (AC Mode) : Pure Sine wave | Undervoltage Correction : Input voltages between 101 and 110 are boosted by 15% | Included Mounting Accessory Description : 4 post rackmount installation accessories included | AC Mode BTU / Hr. (Full Load) : 518 | Output Capacity (VA) : 3000 | Nominal Output Voltage(s) Supported : 110V; 120V; 127V | AC Suppression Response Time : Instantaneous | AC Mode Efficiency Rating (100% Load) : 0.95 | LED Indicators : 14 LEDs indicate line power, power fail, avr, fault, overload, replace battery and site wiring fault conditions; includes 5 LED load and battery charge meter | DC System Voltage (VDC) : 72 | Severe Undervoltage Correction : Input voltages between 90 and 100 are boosted by 30% | EMI / RFI AC Noise Suppression : Yes | Rated input current (Maximum Load) : 24A | Overvoltage Correction : Input voltages between 132 and 146 are reduced by 12% | Communications Interface : DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB (HID enabled) | Output AC Waveform (Battery Mode) : Pure Sine wave | Switches : 2 Switches control off/on power status and alarm-cancel/self-test operation | Individually Controllable Load Banks : Yes | High Availability UPS Features : Hot swappable batteries; Hot swappable UPS power module | Output Capacity Details : 2400W max capacity with external battery packs connected | Installation Form Factors Supported with Optional Accessories : 2 post rackmount ( 2POSTRMKITWM ); Wallmount ( 2POSTRMKITWM ); Tower ( 2-9USTAND ) | Communications Cable : USB, DB9 and EPO cabling included | AC Suppression Joule Rating : 800 | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Frequency Compatibility Details : Automatic frequency selection | Relative Humidity : 0 to 95%, non-condensing | Frequency Compatibility : 50 / 60 Hz | Package Includes : UPS chassis pre-loaded with hot-swappable UPS electronics module and internal battery module;USB, DB9 and EPO cabling;4 post rackmount installation accessories;Owner's manual | UPS Input Connection Type : L5-30P | UPS Housing Material : Steel | Internal UPS Replacement Battery Cartridge : RBC96-RMOD2U | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 90 to 146 | Input Phase : Single-Phase | Output Receptacles : (6) 5-15R; (1) L5-30R | Battery Replacement Description : Hot-swappable, replaceable batteries | Output Voltage Regulation (Line Mode) : 120V: -7% +9%, 110V: -8% + 11%, 127V: -9% +9%

Dimensions:

Width : 17.5 in | Height : 3.5 in | Depth : 24 in | Rack Height : 2U | Input Cord Length (ft.) : 10 | Minimum Required Rack Depth (inches) : 35 | Primary UPS Height (mm) : 89 | Primary UPS Depth (mm) : 610 | UPS Input Cord Length (ft.) : 10 | UPS Power Module Dimensions (hwd, in.) : 3.5 x 17.5 x 24 | Primary UPS Width (mm) : 445