Line Interactive UPS, Rack/Tower, Out: 208V AC , In:208V AC - SMART5000TEL3U

Description:

Line Interactive UPS

Details:

Item : Line Interactive UPS | UPS Type : Line Interactive | Mounting : Rack/Tower | Input Voltage : 208V AC | Output Voltage : 208V AC | Backup Time (Half/Full Load) : 24 min/10 min | Transfer Time : 7 milliseconds (AC to Battery), 1 millisecond (Battery to AC) | Input Current : 24 A | Battery Type : Valve Regulated Lead Acid (VRLA) | Output Watt Capacity (Watts) : 3750 | Low Voltage Transfer to Battery Power (Setpoint) : 167 | Relative Humidity : 0 to 95%, non-condensing | EMI / RFI AC Noise Suppression : Yes | Overvoltage Correction : Input voltages between 228V and 260V are reduced by 12% | Undervoltage Correction : Input voltages between 167V and 194V are boosted by 12% | Switches : 2 Switches control off/on power status and alarm-cancel/self-test operation | Output Voltage Regulation (Line Mode) : 208 & 120V (-6%, +20%) | Battery Mode BTU / Hr. (Full Load) : 1423 | UPS Input Connection Type : L6-30P | UPS Certifications : Meets FCC Part 15 Category A (EMI); Tested to CSA (Canada); Tested to UL1778 (USA) | AC Mode Efficiency Rating (100% Load) : 0.97 | Cooling Method : Fan | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 167 to 260 | Power Factor : 0.75 | Internal UPS Replacement Battery Cartridge : RBC94-3U (quantity 3) | Rated input current (Maximum Load) : 24A | Primary Form Factor : Rackmount | Output Voltage Regulation (Battery Mode) : +/- 5% | UPS AC Suppression Response Time : Instantaneous | Output Capacity Details : 120V 5-15R outlets are limited to 450 watts (max.) | Frequency Compatibility : 60 Hz | Output Receptacles : (2) 5-15R; (2) L6-20R; (1) L6-30R | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Output kVA Capacity (kVA) : 5 | Nominal Output Voltage(s) Supported : 208V | Output AC Waveform (Battery Mode) : Pure Sine wave | AC Mode BTU / Hr. (Full Load) : 366 | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | UPS AC Suppression Joule Rating : 1020 | Alarm Cancel Operation : Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status | Battery Access : Front panel battery access door | Battery Replacement Description : Hot-swappable, user replaceable batteries | Output Volt Amp Capacity (VA) : 5000 | Individually Controllable Load Banks : No | Output AC Waveform (AC Mode) : Sine wave | Nominal Voltage Details : 120V output is limited to 450 watts | Recommended Electrical Service : 30A 208V | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Communications Cable : USB and DB9 cabling included | LED Indicators : 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status | Audible Alarm : Audible alarm indicates power-failure, overload and low-battery conditions | Installation Form Factors Supported with Optional Accessories : 2 post rackmount ( 2POSTRMKITHD ); Tower ( 2-9USTAND ) | UPS Housing Material : Steel | Expandable Runtime : No | Output kW Capacity (kW) : 3.75 | Installation Form Factors Supported with Included Accessories : 4 post 19 inch rackmount | Network Management Cards : SNMPWEBCARD ; TLNETCARD ; WEBCARDLX | Output Circuit Breakers : 20A double pole breaker supports L6-20R outlets, 5A breaker supports 5-15R outlets, L6-30R outlet is unbreakered | Battery Recharge Rate (Included Batteries) : Less than 4 hours from 10% to 90% (typical, full load discharge) | Audible Noise : 45 dBA maximum, front side 1m | Communications Interface : Contact closure; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB | PowerAlert Software : For local monitoring via the UPS™s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | Input Phase : Single-Phase | Nominal Input Voltage(s) Supported : 208V AC | Grounding Lug : Back panel grounding lug | DC System Voltage (VDC) : 48 | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | High Availability UPS Features : Hot swappable batteries | High Voltage Transfer to Battery Power (Setpoint) : 260 | USB : Yes | Software Included : PowerAlert Software | Modem (RJ-11) : Yes | Plug/Connector Type : NEMA L6-30P | Package Contents : Smart Pro 5000TEL3U UPS, SMART5000TEL3U UPS System, PowerAlert Software and cabling, Mounting hardware, Warranty information, Instruction manual | Product Line : SmartPro | Receptacle Detail : 1 x NEMA L6-30R, 2 x NEMA L6-20R, 2 x NEMA 5-15R | Certifications & Standards : UL1778 (USA), CSA (Canada), FCC Class A (Emissions) | Network Management : SNMP Manageable | Form Factor : Rack/Tower | Product Name : SmartPro SMART5000TEL3U 5000VA Tower/Rack-mountable UPS | Emergency Power OFF : Yes | Hot Swappable : Yes | Typical Battery Recharge Time : 4 Hour | Load Capacity : 5000 VA/3750 W | Additional Information : Ideal in rackmount or tower installations for centralized UPS protection of critical 208V equipment in server rooms, internetworking closets and telecommunications systems. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems, Switches: Includes 2 front panel mounted push button switches for system enable, self-test and alarm cancel functions | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 1423 | Product Compliance : ENERGY STAR Qualified; FCC Part 15 Class A (USA) | Product Certifications : CSA (Canada); UL 1778 | Package Includes : SMART5000TEL3U UPS System;USB & DB9 Serial cabling;Mounting hardware;Instruction manual | Output Capacity (Watts) : 3750 | Grounding Details : Back panel grounding lug | UPS Applications : Large Network | Output Capacity (VA) : 5000

Dimensions:

Depth : 25 in | Width : 17.5 in | Height : 5.3 in | UPS Power Module Dimensions (hwd, in.) : 5.25 x 17.5 x 25 | UPS Input Cord Length (ft.) : 10 | Minimum Required Rack Depth (inches) : 30 | Rack Height : 3U | Primary UPS Depth (mm) : 635 | Primary UPS Width (mm) : 445 | Primary UPS Height (mm) : 133