TRIPP LITE Smart UPS, 1.05 kVA, 6 Outlets, Tower/Wall, Out: 120V AC , In:120V AC - SMART 1050 NET

Description:

Smart UPS, Line Interactive, Power Rating 1.05 kVA, Wattage 705 W, Input Voltage 120V AC, Output Voltage 120V AC, Backup Time (Half/Full Load) 23 min/8 min, Mounting Tower/Wall, Outlet Type UPS/Surge, Number of Outlets 6, Medical Grade No, NEMA Receptacle Configuration 5-15R, NEMA Plug Configuration 5-15P, Automatic Volts Regulation Yes, Fax/Modem Line Protection No, Transfer Time 2 to 4 msec, Width 7 in, Depth 7 in, Height 14 in, Cord Length 6 ft, Display Type LED, 60 Hz Hz, Input Current 6.7 A

Details:

Item : Smart UPS | UPS Type : Line Interactive | Power Rating : 1.05 kVA | Mounting : Tower/Wall | Wattage : 705 W | Input Voltage : 120V AC | Output Voltage : 120V AC | Backup Time (Half/Full Load) : 23 min/8 min | Outlet Type : UPS/Surge | Medical Grade : No | Number of Outlets : 6 | Green Environmental Attribute : Product Contributes To Reducing Energy Consumption | Special Features : AVR Corrects Brownouts and Overvoltages, Power Management Software, Pure Sine Wave Output | Fax/Modem Line Protection : No | Transfer Time : 2 to 4 msec | Hz : 60 Hz | Standards : CSA, FCC Part 15 Category B (EMI), NOM, UL 1778 | Includes : PowerAlert Unattended Shutdown and UPS/Power Monitoring Software, USB Monitoring Cable | Footnotes : 4,12 | Input Current : 6.7 A | Display Type : LED | Automatic Volts Regulation : Yes | Ports : USB | NEMA Receptacle Configuration : 5-15R | NEMA Plug Configuration : 5-15p | Phase : 1 | Capacity - Batteries : 1050 VA | Input Connection : 6 ft Cord with NEMA 5-15P Plug | Relative Humidity : 0 to 95%, non-condensing | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Output AC Waveform (AC Mode) : Sine wave | Battery Access : Battery access door | UPS Housing Material : Polycarbonate | EMI / RFI AC Noise Suppression : Yes | Alarm Cancel Operation : Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status | PowerAlert Software : For local monitoring via the UPSâ„¢s built-in USB port, download PowerAlert Local software at http://www.tripplite.com/poweralert | Installation Form Factors Supported with Optional Accessories : Wallmount (UPSWM - tower mounting kit) | UPS AC Suppression Joule Rating : 480 | Output Volt Amp Capacity (VA) : 1050 | Rated input current (Maximum Load) : 6.7A | Output Receptacles : (6) 5-15R | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147 | Internal UPS Replacement Battery Cartridge : RBC52 (quantity 3) | Individually Controllable Load Banks : No | Input Circuit Breakers : 12A | Nominal Input Voltage(s) Supported : 120V AC | Output AC Waveform (Battery Mode) : PWM sine wave | Output Voltage Regulation (Line Mode) : -18%, +8% | AC Suppression Response Time : Instantaneous | Output kVA Capacity (kVA) : 1.05 | Input Phase : Single-Phase | Battery Replacement Description : Hot-swappable, user replaceable batteries | Audible Alarm : Audible alarm indicates power-failure and low-battery conditions | Communications Cable : USB cable included | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | Low Voltage Transfer to Battery Power (Setpoint) : 75 | Nominal Output Voltage(s) Supported : 110V; 115V; 120V | Installation Form Factors Supported with Included Accessories : Tower | Output Watt Capacity (Watts) : 705 | LED Indicators : 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status | AC Suppression Joule Rating : 480 | UPS Input Connection Type : 5-15P; Right-Angled | Recommended Electrical Service : 15A 120V | Severe Undervoltage Correction : Input voltages between 75 and 92 are boosted by 30% | Battery Recharge Rate (Included Batteries) : Less than 4 hours from 10% to 90% (typical, full load discharge) | Overvoltage Correction : Input voltages between 128 and 147 are reduced by 12% | AC Mode Efficiency Rating (100% Load) : 0.96 | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Output Voltage Regulation (Battery Mode) : +/- 5% | UPS AC Suppression Response Time : Instantaneous | Nominal Voltage Details : 120v nominal output in battery mode | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Frequency Compatibility : 60 Hz | Communications Interface : USB | High Availability UPS Features : Hot swappable batteries | Expandable Runtime : No | Undervoltage Correction : Input voltages between 93 and 107 are boosted by 14% | Switches : 2 Switches control off/on power status and alarm-cancel/self-test operation | UPS Certifications : Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI) | High Voltage Transfer to Battery Power (Setpoint) : 147 | Primary Form Factor : Tower | DC System Voltage (VDC) : 18 | Load Capacity : 1050 VA | Plug/Connector Type : NEMA 5-15P | Network Management : SNMP Manageable | Typical Battery Recharge Time : 4 Hour | Product Name : SmartPro 1050VA Tower UPS | Serial Port : Yes | Product Line : SmartPro | Receptacle Detail : 6 x NEMA 5-15R | Form Factor : Tower

Dimensions:

Depth : 7 in | Cord Length : 6 ft | Width : 7 in | Height : 14 in | Input Cord Length (ft.) : 6 | Primary UPS Height (mm) : 300 | UPS Power Module Dimensions (hwd, in.) : 11.8 x 7.2 x 7.2 | Primary UPS Width (mm) : 183 | UPS Input Cord Length (ft.) : 6 | Primary UPS Depth (mm) : 183