Smart UPS, 1.5 kVA, 8 Outlets, Rack/Tower, Out: 120V AC , In:120V AC - SM1500RMXL2UTAA

Description:

Smart UPS, Line Interactive, Power Rating 1.5 kVA, Wattage 1 kW, Input Voltage 120V AC, Output Voltage 120V AC, Backup Time (Half/Full Load) 21 min/7.5 min, Mounting Rack/Tower, Outlet Type UPS/Surge, Number of Outlets 8, Medical Grade No, NEMA Receptacle Configuration 5-15R, NEMA Plug Configuration 5-15P, Automatic Volts Regulation Yes, Fax/Modem Line Protection No, Transfer Time 2 to 4 msec, Width 18 in, Depth 14 in, Height 4 in, Cord Length 10 ft, Display Type LCD, 60 Hz Hz

Details:

Item : Smart UPS | UPS Type : Line Interactive | Power Rating : 1.5 kVA | Mounting : Rack/Tower | Wattage : 1 kW | Input Voltage : 120V AC | Output Voltage : 120V AC | Backup Time (Half/Full Load) : 21 min/7.5 min | Outlet Type : UPS/Surge | Medical Grade : No | Number of Outlets : 8 | Footnotes : 3,4,7,8,9 | Green Environmental Attribute : Product Contributes To Reducing Energy Consumption | Hz : 60 Hz | NEMA Receptacle Configuration : 5-15R | Phase : 1 | Transfer Time : 2 to 4 msec | Automatic Volts Regulation : Yes | Ports : DB9 Serial, EPO, SNMP/Web Slot, USB | Input Current : 12 A | Includes : 4-Post Installation Kit, PowerAlert Software with USB, Serial and EPO Cables | Standards : CSA, FCC Part 15 Category B (EMI), NOM, ROHS (Restriction of Hazardous Substances), TAA Compliant, UL 1778 | Display Type : LCD | NEMA Plug Configuration : 5-15p | Fax/Modem Line Protection : No | Special Features : Advanced AVR Corrects Brownouts and Overvoltages, Pure Sine Wave Output, Extended Runtime w/BP36V15-2U, BP36V42-3U | Green Certification or Other Recognition : UL 1778CSAFCC Part 15 Category B (EMI)TAA, RoHS | Capacity - Batteries : 1500 VA/1350 W | Input Connection : 10 ft Cord with NEMA 5-15P Plug | Battery Type : Valve Regulated Lead Acid (VRLA) | Relative Humidity : 0 to 95%, non-condensing | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | Input Circuit Breakers : 15A | Installation Form Factors Supported with Included Accessories : 4 post 19 inch rackmount | High Availability UPS Features : Hot swappable batteries | Nominal Voltage Details : 120v nominal output in battery mode | Load Management Receptacles : Two switchable two-outlet 5-15R load banks | Undervoltage Correction : Input voltages between 95 and 108 are boosted by 12% | UPS Certifications : Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI); TAA Compliant | Battery Access : Front panel battery access door | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145 | Nominal Output Voltage(s) Supported : 110V; 115V; 120V | AC Mode BTU / Hr. (Full Load) : 237 | Network UPS Tools Compatibility : NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite | Output Watt Capacity (Watts) : 1350 | Severe Undervoltage Correction : Input voltages between 83 and 94 are boosted by 24% | Audible Alarm : Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions | Internal UPS Replacement Battery Cartridge : RBC93-2U | Alarm Cancel Operation : Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available | Nominal Input Voltage(s) Supported : 120V AC | Output Capacity Details : Output is reduced to 1200 watts maximum when used with external battery packs | Recommended Electrical Service : 15A 120V | UPS AC Suppression Joule Rating : 570 | Expandable Runtime : Yes | Low Voltage Transfer to Battery Power (Setpoint) : 83 | Frequency Compatibility : 60 Hz | AC Mode Efficiency Rating (100% Load) : 0.95 | Audible Noise : 45 dBA maximum, front side 1m | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | High Voltage Transfer to Battery Power (Setpoint) : 145 | EMI / RFI AC Noise Suppression : Yes | Output Voltage Regulation (Line Mode) : -14%, +6% | UPS AC Suppression Response Time : Instantaneous | Output kVA Capacity (kVA) : 1.5 | Cooling Method : Fan | UPS Housing Material : Steel | Battery Replacement Description : Hot-swappable, user replaceable batteries | Power Factor : 0.9 | Switches : 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Expandable Battery Runtime : Extended runtime supported via optional external battery packs | DC System Voltage (VDC) : 36 | Output kW Capacity (kW) : 1.35 | Output Volt Amp Capacity (VA) : 1500 | PowerAlert Software : For local monitoring via the UPSâ„¢s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | External Battery Pack Compatibility : BP36V15-2U (limit 1); BP36V42-3U (multi-pack compatible); BP36V27 -2US (multi-pack compatible) | Battery Recharge Rate (Included Batteries) : Less than 4.5 hours from 10% to 90% | Rated input current (Maximum Load) : 12A | Network Management Cards : SNMPWEBCARD ; TLNETCARD ; WEBCARDLX | Installation Form Factors Supported with Optional Accessories : 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM ) | Input Phase : Single-Phase | Included Mounting Accessory Description : Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm) | Grounding Lug : Back panel grounding lug | UPS Input Connection Type : 5-15P | Communications Interface : USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface | Communications Cable : USB and DB9 cabling included | Primary Form Factor : Rackmount | Output AC Waveform (AC Mode) : Sine wave | Front Panel LCD Display : Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) | Output AC Waveform (Battery Mode) : Pure Sine wave | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Output Voltage Regulation (Battery Mode) : +/- 5% | Battery Mode BTU / Hr. (Full Load) : 751 | Overvoltage Correction : Input voltages between 127 and 145 are reduced by 12% | Individually Controllable Load Banks : Yes | Output Receptacles : (8) 5-15R | Product Line : SmartPro | Hot Swappable : Yes | Form Factor : Rack/Tower | Emergency Power OFF : Yes | Network Management : SNMP Manageable | Receptacle Detail : 8 x NEMA 5-15R | TAA Compliant : Yes | USB : Yes | Load Capacity : 1500 VA/1350 W | Software Included : PowerAlert Software | Product Name : SM1500RMXL2UTAA 1500 VA Tower/Rack Line Interactive UPS TAA Compliant | Plug/Connector Type : NEMA 5-15P | Serial Port : Yes | Typical Battery Recharge Time : 4.50 Hour | Package Contents : SmartPro SM1500RMXL2UTAA 1500 VA Tower/Rack Mountable UPS, PowerAlert Software, USB Cable, Serial Cable, Mounting Hardware for 4 Post Rackmount Installation, Cable for Emergency Power Off Interface, Instructional Manual with Warranty Information | Certifications & Standards : UL 1778, CSA, FCC Part 15 Category B (EMI), TAA | Product Compliance : FCC Part 15 Class B (USA); Trade Agreements Act (TAA) | UPS Applications : Large Network; High-End Desktop/Small Network | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 751 | Grounding Details : Back panel grounding lug | Output Capacity (VA) : 1500 | Output Capacity (Watts) : 1350 | Product Certifications : CSA (Canada); NOM (Mexico); UL 1778 | Package Includes : SM1500RMXL2UTAA SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS;USB cable;DB9 cable;EPO cable;Mounting hardware;Owner's manual

Dimensions:

Cord Length : 10 ft | Width : 18 in | Height : 4 in | Depth : 14 in | Primary UPS Width (mm) : 439 | Minimum Required Rack Depth with External Battery Pack (in.) : 19.95 | Rack Height : 2U | Primary UPS Height (mm) : 88 | UPS Input Cord Length (ft.) : 10 | UPS Power Module Dimensions (hwd, in.) : 3.45 x 17.3 x 13.45 | Primary UPS Depth (mm) : 342 | Minimum Required Rack Depth without External Battery Pack (in.) : 16.45 | Minimum Required Rack Depth (inches) : 17