TRIPP LITE Smart UPS, 1.5 kVA, 8 Outlets, Rack/Tower, Out: 120V AC , In:120V AC - Smart1500RM2U

Description:

Smart UPS, Line Interactive, Power Rating 1.5 kVA, Wattage 1 kW, Input Voltage 120V AC, Output Voltage 120V AC, Backup Time (Half/Full Load) 19 min/7 min, Mounting Rack/Tower, Outlet Type (4) Surge, (4) UPS/Surge, Number of Outlets 8, Medical Grade No, NEMA Receptacle Configuration 5-15R, NEMA Plug Configuration 5-15P, Automatic Volts Regulation Yes, Fax/Modem Line Protection No, Transfer Time 2 to 4 msec, Width 18 in, Depth 14 in, Height 4 in, Cord Length 10 ft, Display Type LCD, 60 Hz Hz

Details:

Item : Smart UPS | UPS Type : Line Interactive | Power Rating : 1.5 kVA | Mounting : Rack/Tower | Wattage : 1 kW | Input Voltage : 120V AC | Output Voltage : 120V AC | Backup Time (Half/Full Load) : 19 min/7 min | Outlet Type : UPS/Surge | Medical Grade : No | Number of Outlets : 8 | Hz : 60 Hz | NEMA Plug Configuration : 5-15p | NEMA Receptacle Configuration : 5-15R | Green Environmental Attribute : Product Contributes To Reducing Energy Consumption | Fax/Modem Line Protection : No | Ports : DB9 Serial, SNMP/Web Slot, USB EPO | Standards : Meets FCC Part 15 Category B (EMI), Tested to CSA (Canada), Tested to NOM (Mexico), UL1778 (USA) | Phase : 1 | Input Current : 12 A | Footnotes : 3,4,10,12 | Display Type : LCD | Transfer Time : 2 to 4 msec | Includes : 4-Post Rack Mount Installation Kit, PowerAlert Software with USB, Serial and EPO Cables | Special Features : Advanced AVR Corrects Brownouts and Overvoltages, Pure Sine Wave Output | Automatic Volts Regulation : Yes | Input Connection : 10 ft Cord with NEMA 5-15P Plug | Cooling Method : Fan | UPS AC Suppression Response Time : Instantaneous | Input Circuit Breakers : 15A | Output Watt Capacity (Watts) : 1350 | Battery Mode BTU / Hr. (Full Load) : 1012 | Audible Noise : 45 dBA maximum, front side 1m | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | Included Mounting Accessory Description : Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm) | Communications Interface : USB; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface | Battery Replacement Description : Hot-swappable, user replaceable batteries | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147 | Low Voltage Transfer to Battery Power (Setpoint) : 83 | Network UPS Tools Compatibility : NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Nominal Voltage Details : 120v nominal output in battery mode | UPS Certifications : Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI) | High Availability UPS Features : Hot swappable batteries | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Alarm Cancel Operation : Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available | UPS AC Suppression Joule Rating : 570 | Output kW Capacity (kW) : 1.35 | Communications Cable : USB and DB9 cabling included | Frequency Compatibility : 60 Hz | Output Receptacles : (8) 5-15R | Overvoltage Correction : Input voltages between 128 and 147 are reduced by 12% | Load Management Receptacles : Two switchable two-outlet 5-15R load banks | Output AC Waveform (Battery Mode) : Pure Sine wave | Grounding Lug : Back panel grounding lug | Network Management Cards : SNMPWEBCARD ; TLNETCARD ; WEBCARDLX ; RELAYIOCARD | UPS Input Connection Type : 5-15P | Nominal Output Voltage(s) Supported : 110V; 115V; 120V | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | DC System Voltage (VDC) : 36 | Installation Form Factors Supported with Included Accessories : 4 post 19 inch rackmount | Output Voltage Regulation (Line Mode) : -21%, +8% | High Voltage Transfer to Battery Power (Setpoint) : 147 | Expandable Runtime : No | AC Mode BTU / Hr. (Full Load) : 267 | Recommended Electrical Service : 15A 120V | Individually Controllable Load Banks : Yes | Input Phase : Single-Phase | Output Voltage Regulation (Battery Mode) : +/- 5% | Primary Form Factor : Rackmount | Output AC Waveform (AC Mode) : Sine wave | Undervoltage Correction : Input voltages between 83 and 107 are boosted by 14% | AC Mode Efficiency Rating (100% Load) : 0.95 | UPS Housing Material : Steel | Internal UPS Replacement Battery Cartridge : RBC93-2U | Relative Humidity : 0 to 95%, non-condensing | Installation Form Factors Supported with Optional Accessories : 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM ) | Battery Recharge Rate (Included Batteries) : Less than 4.5 hours from 10% to 90% (typical, full load discharge) | Nominal Input Voltage(s) Supported : 120V AC | Rated input current (Maximum Load) : 12A | Output kVA Capacity (kVA) : 1.5 | Battery Access : Front panel battery access door | Switches : 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions | Power Factor : 0.9 | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | EMI / RFI AC Noise Suppression : Yes | Front Panel LCD Display : Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) | Audible Alarm : Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions | Output Volt Amp Capacity (VA) : 1500 | PowerAlert Software : For local monitoring via the UPS™s built-in communication ports , download PowerAlert Local software at http://www.tripplite.com/poweralert | Typical Battery Recharge Time : 4 Hour | Certifications & Standards : UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications | Sound Emission (A-Weighted) : 45 dB(A) | Product Name : SmartPro 1500RM2U UPS | USB : Yes | Overload Protection : Yes | Plug/Connector Type : NEMA 5-15P | Surge Energy Rating : 570 J | Emergency Power OFF : Yes | Maximum Operating Temperature : 104°F (40°C) | Battery Life : 6 Year | Form Factor : Rack-mountable | Storage Relative Humidity : 0% - 95% | Status Indicators : LED Indicator | Battery Characteristics : Valve-regulated | Storage Temperature : 5°F (-15°C) - 122°F (50°C) | Replaceable Battery : Yes | DC System Voltage : 36 V DC | Battery Chemistry : Lead Acid | Total Number of Expansion Slots : 1 | Waveform Type : Sine Wave | Network Management : SNMP/Webcard | Alarm : Low Battery, On Battery, Overload | Thermal Dissipation : 78.25 W | Receptacle Detail : 8 x NEMA 5-15R | Package Contents : SmartPro 1500RM2U UPS, Mounting hardware for 4 post rackmount installation, Cabling for USB & DB9 monitoring and EPO switching, PowerAlert unattended shutdown and UPS/Power monitoring software, Warranty information | Hot Swappable : Yes | Product Line : SmartPro | Maximum Operating Elevation : 6561.68 ft | Load Capacity : 1500 VA/1350 W

Dimensions:

Height : 4 in | Width : 18 in | Depth : 14 in | Cord Length : 10 ft | Primary UPS Depth (mm) : 342 | Primary UPS Height (mm) : 88 | Minimum Required Rack Depth (inches) : 16.45 | UPS Power Module Dimensions (hwd, in.) : 3.45 x 17.3 x 13.45 | Rack Height : 2U | UPS Input Cord Length (ft.) : 10 | Primary UPS Width (mm) : 439