Smart UPS, 2.2 kVA, 8 Outlets, Rack/Tower, Out: 120V AC , In:120V AC - Smart2200RMXL2U

Description:

Smart UPS, Line Interactive, Power Rating 2.2 kVA, Wattage 1.6 kW, Input Voltage 120V AC, Output Voltage 120V AC, Backup Time (Half/Full Load) 16 min/6 min, Mounting Rack/Tower, Outlet Type (4) Surge, (4) UPS/Surge, Number of Outlets 8, Medical Grade No, NEMA Receptacle Configuration 5-15R, 5-20R, NEMA Plug Configuration 5-20P, Automatic Volts Regulation Yes, Fax/Modem Line Protection No, Transfer Time 2 to 4 msec, Width 18 in, Depth 19 in, Height 4 in, Cord Length 10 ft, Display Type LCD

Details:

Item : Smart UPS | UPS Type : Line Interactive | Power Rating : 2.2 kVA | Mounting : Rack/Tower | Wattage : 1.6 kW | Input Voltage : 120V AC | Output Voltage : 120V AC | Backup Time (Half/Full Load) : 16 min/6 min | Outlet Type : UPS/Surge | Medical Grade : No | Number of Outlets : 8 | Includes : 4-Post Rack Mount Installation Kit, PowerAlert Software with USB, Serial and EPO Cables | Automatic Volts Regulation : Yes | Hz : 60 Hz | Transfer Time : 2 to 4 msec | NEMA Receptacle Configuration : 5-15R, 5-20R | Special Features : Advanced AVR Corrects Brownouts and Overvoltages, Pure Sine Wave Output, Extended Runtime w/BP48V24-2U and BP48V60RT-3U | Display Type : LCD | Fax/Modem Line Protection : No | Footnotes : 1,2,3,4,10,12 | Ports : DB9 Serial, EPO, SNMP/Web Slot, USB (HID Enabled) | NEMA Plug Configuration : 5-20P | Green Environmental Attribute : Product Contributes To Reducing Energy Consumption | Input Current : 16 A | Standards : CSA, FCC Part 15 Category A (EMI), NOM, ROHS (Restriction of Hazardous Substances), UL 1778 | Phase : 1 | Green Certification or Other Recognition : UL1778 (USA)CSA (Canada)NOM (Mexico)FCC Part 15 Category A (EMI), RoHS | Operating Temp. Range : 104°F (40°C) | Capacity - Batteries : 2200 VA/1920 W | Input Connection : 10 ft Cord with NEMA 5-20P Plug | Nominal Input Voltage(s) Supported : 120V AC | Battery Recharge Rate (Included Batteries) : Less than 4.5 hours from 10% to 90% (typical, full load discharge) | Nominal Voltage Details : 120v nominal output in battery mode | Output Voltage Regulation (Battery Mode) : +/- 5% | Overvoltage Correction : Voltage reduction of 12% applies when input is between 127 and 145 | Battery Access : Front panel battery access door | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | Battery Mode BTU / Hr. (Full Load) : 1157 | Internal UPS Replacement Battery Cartridge : RBC94-2U | UPS AC Suppression Response Time : Instantaneous | Output Receptacles : (4) 5-15R; (4) 5-15/20R | Recommended Electrical Service : 20A 120V | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145 | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | Audible Alarm : Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions | Expandable Runtime : Yes | Switches : 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions | Network UPS Tools Compatibility : NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite | Output AC Waveform (Battery Mode) : Pure Sine wave | Installation Form Factors Supported with Optional Accessories : 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM ) | PowerAlert Software : For local monitoring via the UPSâ„¢s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Output AC Waveform (AC Mode) : Pure Sine wave | High Availability UPS Features : Hot swappable batteries | Grounding Lug : Back panel grounding lug | Audible Noise : 45 dBA maximum, front side 1m | Output Capacity Details : Output is reduced to 1600 watts maximum when used with external battery packs | UPS Input Connection Type : 5-20P | Primary Form Factor : Rackmount | AC Mode BTU / Hr. (Full Load) : 306 | Frequency Compatibility : 60 Hz | Output Watt Capacity (Watts) : 1920 | Installation Form Factors Supported with Included Accessories : 4 post 19 inch rackmount | Load Management Receptacles : Two switched single outlet load banks (1 5-15/20R & 1 5-15R) | Output Volt Amp Capacity (VA) : 2200 | Front Panel LCD Display : Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) | High Voltage Transfer to Battery Power (Setpoint) : 145 | Severe Undervoltage Correction : Voltage boost of 24% applies when input voltage is between 83 and 95 | Cooling Method : Fan | Network Management Cards : SNMPWEBCARD ; TLNETCARD ; WEBCARDLX | Undervoltage Correction : Voltage boost of 12% applies when input voltage is between 96 and 108 | Expandable Battery Runtime : Extended runtime supported via optional external battery packs | Output Voltage Regulation (Line Mode) : -14%, +6% | Rated input current (Maximum Load) : 16.0A | AC Mode Efficiency Rating (100% Load) : 0.96 | DC System Voltage (VDC) : 48 | Communications Interface : USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface | Alarm Cancel Operation : Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available | Individually Controllable Load Banks : Yes | Relative Humidity : 0 to 95%, non-condensing | UPS Housing Material : Steel | Battery Replacement Description : Hot-swappable, user replaceable batteries | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | UPS Certifications : Meets FCC Part 15 Category A (EMI); Tested to CSA (Canada); Tested to NOM (Mexico); Tested to UL1778 (USA) | External Battery Pack Compatibility : BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V27-2US (multi-pack compatible) | Input Phase : Single-Phase | Output kVA Capacity (kVA) : 2.2 | Low Voltage Transfer to Battery Power (Setpoint) : 83 | Communications Cable : USB and DB9 cabling included | Output kW Capacity (kW) : 1.92 | UPS AC Suppression Joule Rating : 570 | Nominal Output Voltage(s) Supported : 110V; 115V; 120V | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Included Mounting Accessory Description : Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm) | Expandable Runtime Description : Maximum output capacity is 1600 watts when used with external battery packs | Power Factor : 0.87 | EMI / RFI AC Noise Suppression : Yes | Serial Port : Yes | Product Name : SMART2200RMXL2U UPS System | Hot Swappable : Yes | Network Management : SNMP Manageable | Product Line : SmartPro | Alarm : On Battery, Overload, Low Battery | Certifications & Standards : UL1778 (USA), CSA (Canada), NOM (Mexico), FCC Part 15 Category A (EMI) | Maximum Operating Temperature : 104°F (40°C) | Receptacle Detail : 4 x NEMA 5-15R, 4 x NEMA 5-20R | USB : Yes | Package Contents : SMART2200RMXL2U UPS System, Poweralert Software CD-ROM, USB, Serial And EPO Cabling, Owner's Manual | Protection Type : Under Voltage, Over Voltage | Emergency Power OFF : Yes | Load Capacity : 1950 VA/1950 W | Status Indicators : 5 Front Panel Leds: Green Power Led, Green Voltage Correction Led, 3 Color Battery Charge Led, 3 Color Output Load Led, Red Battery Warning Led | Waveform Type : Sine Wave | Plug/Connector Type : NEMA 5-20P | Typical Battery Recharge Time : 4.50 Hour

Dimensions:

Width : 18 in | Height : 4 in | Cord Length : 10 ft | Depth : 19 in | UPS Input Cord Length (ft.) : 10 | Primary UPS Width (mm) : 440 | Minimum Required Rack Depth without External Battery Pack (in.) : 24.29 | Primary UPS Height (mm) : 88 | Minimum Required Rack Depth with External Battery Pack (in.) : 26.29 | Rack Height : 2U | Primary UPS Depth (mm) : 490 | UPS Power Module Dimensions (hwd, in.) : 3.46 x 17.32 x 19.29