TRIPP LITE Smart UPS, Out: 120V AC , In:120V AC - SM2200RMXL2UP

Description:

UPS,SmartPro,Sine Wave,2.2kVA,1.92kW,2U

Details:

Item : Smart UPS | UPS Type : Line Interactive | Input Voltage : 120V AC | Output Voltage : 120V AC | Backup Time (Half/Full Load) : 13 min/4.50 min | Input Current : 16 A | Transfer Time : 5 milliseconds (line to battery mode); 1 millisecond (battery to line mode) | Battery Type : Valve Regulated Lead Acid (VRLA) | Communications Cable : USB and DB9 cabling included | Battery Recharge Rate (Included Batteries) : Less than 4.5 hours from 10% to 90% (typical, full load discharge) | Output kVA Capacity (kVA) : 2.2 | Grounding Lug : Back panel grounding lug | Output Capacity Details : Supports 1920 watts in standalone or extended runtime configurations | Severe Undervoltage Correction : Voltage boost of 24% applies when input voltage is between 83 and 95 | Battery Mode BTU / Hr. (Full Load) : 980 | High Availability UPS Features : Hot swappable batteries | AC Mode BTU / Hr. (Full Load) : 250 | DC System Voltage (VDC) : 48 | Communications Interface : USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains regulated line power output with an input voltage range of 83 and 145 | UPS Input Connection Type : 5-20P | Primary Form Factor : Rackmount | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | Battery Access : Front panel battery access door | Nominal Output Voltage(s) Supported : 110V; 115V; 120V | Switches : 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions | Front Panel LCD Display : Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) | Individually Controllable Load Banks : Yes | Installation Form Factors Supported with Included Accessories : 4 post 19 inch rackmount | UPS AC Suppression Response Time : Instantaneous | Nominal Voltage Details : 120v nominal output in battery mode | Output Receptacles : (4) 5-15R; (4) 5-15/20R | Output Volt Amp Capacity (VA) : 2200 | Cooling Method : Fan | Relative Humidity : 0 to 95%, non-condensing | Installation Form Factors Supported with Optional Accessories : 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM ) | Output Watt Capacity (Watts) : 1920 | Power Factor : 0.87 | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Output AC Waveform (Battery Mode) : Pure Sine wave | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius. | Frequency Compatibility : 60 Hz | UPS AC Suppression Joule Rating : 570 | Nominal Input Voltage(s) Supported : 120V AC | Output AC Waveform (AC Mode) : Pure Sine wave | Recommended Electrical Service : 20A 120V | Low Voltage Transfer to Battery Power (Setpoint) : 83 | Expandable Battery Runtime : Extended runtime supported via optional external battery packs | Overvoltage Correction : Voltage reduction of 12% applies when input is between 127 and 145 | High Voltage Transfer to Battery Power (Setpoint) : 145 | Battery Replacement Description : Hot-swappable, user replaceable batteries | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius. | UPS Certifications : Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI) | Output Voltage Regulation (Line Mode) : -14%, +6% | UPS Housing Material : Steel | AC Mode Efficiency Rating (100% Load) : 0.96 | Undervoltage Correction : Voltage boost of 12% applies when input voltage is between 96 and 108 | Internal UPS Replacement Battery Cartridge : RBC94-2U | PowerAlert Software : For local monitoring via the UPS™s built-in USB / Serial ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | Output Voltage Regulation (Battery Mode) : +/- 5% | Rated input current (Maximum Load) : 16A | External Battery Pack Compatibility : BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V27-2US (multi-pack compatible) | Load Management Receptacles : Two switched single outlet load banks (1 5-15/20R & 1 5-15R) | Audible Noise : 45 dBA maximum, front side 1m | EMI / RFI AC Noise Suppression : Yes | Included Mounting Accessory Description : Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm) | Network UPS Tools Compatibility : NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite | Expandable Runtime : Yes | Audible Alarm : Audible alarm indicates power-failure, overload and low-battery conditions | Output kW Capacity (kW) : 1.92 | Input Phase : Single-Phase | Alarm Cancel Operation : Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available | Network Management Cards : SNMPWEBCARD ; TLNETCARD ; WEBCARDLX | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | Serial Port : Yes | Emergency Power OFF : Yes | Typical Battery Recharge Time : 4.50 Hour | Software Included : PowerAlert Software | Product Line : SmartPro | Hot Swappable : Yes | Receptacle Detail : 4 x NEMA 5-15R, 4 x NEMA 5-15/20R | Package Contents : SmartPro SM2200RMXL2UP 2200 VA Tower/Rack Mountable UPS, 4 Post 19 inch Rackmount Mounting Rail Kit, PowerAlert Software CD, USB Cable, Serial Cable, EPO Cable | Certifications & Standards : UL1778, FCC Part 15 Category A (EMI) | Form Factor : Rack/Tower | Network Management : SNMP Manageable | Product Name : SmartPro SM2200RMXL2UP 2200 VA Tower/Rack Mountable UPS | Load Capacity : 2200 VA/1920 W | USB : Yes | Plug/Connector Type : NEMA 5-20P | Output Capacity (Watts) : 1920 | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 980 | Package Includes : SM2200RMXL2UP UPS system;USB, Serial & EPO cabling;4 post installation kit;Owner's manual | Product Certifications : CSA (Canada); NOM (Mexico); UL 1778 | Grounding Details : Back panel grounding lug | Output Capacity (VA) : 2200 | UPS Applications : Large Network | Product Compliance : FCC Part 15 Class A (USA)

Dimensions:

Height : 3.5 in | Width : 17.5 in | Depth : 19 in | Minimum Required Rack Depth with External Battery Pack (in.) : 26 | UPS Power Module Dimensions (hwd, in.) : 3.50 x 17.50 x 19.00 | Primary UPS Depth (mm) : 483 | Primary UPS Width (mm) : 445 | UPS Input Cord Length (ft.) : 10 | Primary UPS Height (mm) : 89 | Minimum Required Rack Depth without External Battery Pack (in.) : 24 | Rack Height : 2U | Minimum Required Rack Depth (inches) : 22