TRIPP LITE Smart UPS, Out: 120V AC , In:120V AC - SM3000RM2UNTAA

Description:

UPS,SmartPro,3kVA,2.25kW,SNMPWEBCARD,2U

Details:

Item : Smart UPS | UPS Type : Line Interactive | Input Voltage : 120V AC | Output Voltage : 120V AC | Backup Time (Half/Full Load) : 10 min/3.50 min | Transfer Time : 5 milliseconds (AC to battery); 1 millisecond (battery to AC) | Input Current : 24 A | Battery Type : Valve Regulated Lead Acid (VRLA) | High Availability UPS Features : Hot swappable batteries | DC System Voltage (VDC) : 48 | Network Monitoring Port : RJ45 Network port, Micro-USB Configuration/Console port, USB A port supports a variety of Envirosense2 environmental and control modules. See Accessories>Management Hardware section for more information about these modules. | Battery Access : Front panel battery access door | UPS Certification Details : SAFETY STANDARD (U.S.) - UL1778:2014 (5th Ed) R10.17; SAFETY STANDARD (CANADA) - CAN/CSA-C22.2 No. 107.3-14 (3rd Ed) + GI1 / FCC/ICES COMPLIANT - CLASS A | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Rated input current (Maximum Load) : 24A | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Output Watt Capacity (Watts) : 2250 | Expandable Runtime : Yes | Battery Replacement Description : Hot-swappable, user replaceable batteries | Operating Elevation (m) : 0 - 3000 m | SNMP Compatibility : SNMP V1, V2c, V3 | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145 | Power Factor : 0.75 | Relative Humidity : 0 to 95%, non-condensing | Load Management Receptacles : Two switchable single-outlet load banks | Output Receptacles : (8) 5-15/20R; (1) L5-30R | Recommended Electrical Service : 30A 120V | AC Mode BTU / Hr. (Full Load) : 189 | PowerAlert Software : For local monitoring via the UPS™s built-in Serial or USB communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert. LX Platform Interface: PowerAlert Device Manager 15 (PADM15) | Alarm Cancel Operation : Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available | Network Monitoring Port Description : Includes pre-installed WEBCARDLX Network Management Card | UPS AC Suppression Response Time : Instantaneous | Output AC Waveform (Battery Mode) : Pure Sine wave | Battery Mode BTU / Hr. (Full Load) : 1356 | Frequency Compatibility : 60 Hz | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | UPS Housing Material : Steel | UPS Input Connection Type : L5-30P | Overvoltage Correction : Input voltages between 127 and 145 are reduced by 12% | External Battery Pack Compatibility : BP48V24-2U (limit 1); BP48V242UTAA (limit 1); BP48V27-2US (multi-pack compatible); BP48V60RT-3U (multi-pack compatible); BP48V60RT3UTAA (multi-pack compatible) | EPO Port : RJ11 interface jack with 4-meter cable included. Supports normally open and normally closed EPO systems | Severe Undervoltage Correction : Input voltages between 83 and 95 are boosted by 24% | Audible Alarm : Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions | AC Mode Efficiency Rating (100% Load) : 0.98 | Output Volt Amp Capacity (VA) : 3000 | Output kVA Capacity (kVA) : 3 | Grounding Lug : Includes back panel grounding lug | Battery Recharge Rate (Included Batteries) : Less than 4.5 hours from 10% to 90% | UPS Certifications : Meets FCC Part 15 Category A (EMI); TAA Compliant; Tested to CSA (Canada); Tested to NOM (Mexico); Tested to UL1778 (USA) | Communications Interface : DB9 Serial; EPO (emergency power off); Pre-installed network card; USB (HID enabled) | Operating Elevation (ft.) : 0-3000m / 0-10,000 ft. | Primary Form Factor : Rackmount | Installation Form Factors Supported with Included Accessories : 4 post 19 inch rackmount | UPS AC Suppression Joule Rating : 570 | UPS Dataline Suppression : 1 line TEL/DSL or Ethernet | Cooling Method : Fan | Network UPS Tools Compatibility : NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite | Expandable Battery Runtime : Output with external battery pack configurations is limited to 1600 watts maximum | Output AC Waveform (AC Mode) : Pure Sine wave | Audible Noise : 45 dBA maximum, front side 1m | High Voltage Transfer to Battery Power (Setpoint) : 145 | Communications Cable : Micro-USB, USB and DB9 cabling included | Nominal Voltage Details : 120v nominal output in battery mode | Input Phase : Single-Phase | Nominal Output Voltage(s) Supported : 110V; 115V; 120V | Individually Controllable Load Banks : Yes | EMI / RFI AC Noise Suppression : Yes | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | Internal UPS Replacement Battery Cartridge : RBC94-2U | Low Voltage Transfer to Battery Power (Setpoint) : 83 | Installation Form Factors Supported with Optional Accessories : 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM ) | Nominal Input Voltage(s) Supported : 120V AC | Included Mounting Accessory Description : Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm) | Output Voltage Regulation (Line Mode) : -14%, +6% | Output Voltage Regulation (Battery Mode) : +/- 5% | Switches : 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions. . LX Platform Interface: Recessed reset switch for interface reboot and factory reset | Undervoltage Correction : Input voltages between 108 and 96 are boosted by 12% | Front Panel LCD Display : Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) | Output kW Capacity (kW) : 2.25 | Output Circuit Breakers : Two 20A output breakers protect 4 5-15/20R outlets each | LED Indicators : Network Link/Activity (Green): Flashes for network activity. Network Speed (Yellow): 10 Mbps (Flashing), 100 Mbps (On steady). LX Platform Interface Status: Normal Operation (Solid Green); Software Update (Alternating Green/Orange ~1/sec); Factory Reset (Alternating Green/Orange ~2/sec). | Receptacle Detail : 1 x NEMA L5-30R, 8 x NEMA 5-15/20R | Emergency Power OFF : Yes | Waveform Type : Pure Sine Wave | Product Name : SmartPro SM3000RM2UNTAA 3000 VA Tower/Rack-mountable UPS | Network Management : SNMP Manageable | Circuit Breaker : Yes | Maximum Operating Temperature : 104°F (40°C) | Surge Energy Rating : 570 J | Load Capacity : 3000 VA/2250 W | Plug/Connector Type : NEMA L5-30P | Protection Type : RFI, Black Out, Over Voltage, Brownout, Under Voltage, Surge, EMI | TAA Compliant : Yes | Certifications & Standards : UL1778, CSA, NOM, FCC Part 15, TAA | Serial Port : Yes | Form Factor : Rack-mountable, Tower | Package Contents : SmartPro SM3000RM2UNTAA 3000 VA Tower/Rack-mountable UPS, USB, Serial & EPO Cabling, 4 x Post Rackmount Installation Kit, Instruction Manual | Alarm : Power Failure, Overload, UPS Fault, Remote Shutdown, Low Battery, UPS StartUp | Hot Swappable : Yes | USB : Yes | Product Line : SmartPro | Software Included : PowerAlert Software | Output Capacity (Watts) : 2250 | UPS Applications : Large Network | Product Compliance : FCC Part 15 Class A (USA); Trade Agreements Act (TAA) | Package Includes : SM3000RM2UNTAA UPS System with Pre-Installed WEBCARDLX Network Interface;USB, Serial & EPO cabling;4-post rackmount installation kit;Instruction manual | Network Management Cards : WEBCARDLXE | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 1356 | Output Capacity (VA) : 3000 | Product Certifications : CSA (Canada); NOM (Mexico); UL 1778 | Grounding Details : Includes back panel grounding lug

Dimensions:

Width : 17.5 in | Height : 3.5 in | Cord Length : 10 ft | Depth : 19.5 in | UPS Input Cord Length (ft.) : 10 | Minimum Required Rack Depth without External Battery Pack (in.) : 24.96 | Minimum Required Rack Depth with External Battery Pack (in.) : 26.46 | Primary UPS Height (mm) : 88 | Primary UPS Width (mm) : 440 | Primary UPS Depth (mm) : 494 | Rack Height : 2U | UPS Power Module Dimensions (hwd, in.) : 3.46 x 17.32 x 19.46 | Minimum Required Rack Depth (inches) : 23