Smart UPS, Out: 230/208/200/240/220V AC , In:220V AC - SU20KRT

Description:

UPS,SmartOnline,20kVA,18kW,Bypass,12U

Details:

Item : Smart UPS | UPS Type : Online | Input Voltage : 220V AC | Output Voltage : 230/208/200/240/220V AC | Backup Time (Half/Full Load) : 12.50 min/4.30 min | Transfer Time : No transfer time (0 ms.) in online, double-conversion mode | Input Current : 112.20 A | Battery Type : Valve Regulated Lead Acid (VRLA) | UPS Input Connection Description : 3 wire single phase input (L1, L2, G) | PowerAlert Software : For local monitoring via the UPS™s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | Frequency Compatibility : 50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion | Expandable Runtime : Yes | Relative Humidity : 0 to 95%, non-condensing | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Input Phase : Single-Phase | Power Factor : 0.9 | Undervoltage Correction : Corrects undervoltages as low as 100V | Network Monitoring Port Description : Applications utilizing any supported network management card option, require the installation of two of the same model network card to install one card per included UPS power module; RELAYIOMINI installation requires removal of panel containing USB ports on each included UPS power module | Included Mounting Accessory Description : 4 sets of adjustable 4 post rack rails included (one for each included 3U module) | Installation Form Factors Supported with Included Accessories : 4 post 19 inch rackmount | Communications Interface : USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface | Front Panel LCD Display : Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options; LED/LCD panel rotates for viewing in rack/tower formats; LCD Display supports ENGLISH, FRENCH, GERMAN, ITALIAN, SPANISH and PORTUGUESE (see manual) | Switches : 2 Switches control off/on power status and alarm-cancel/self-test operation; 2 additional switches support set and execute scrolling LCD functions; bundled PDU includes bypass switch to enable hot-swap UPS power module replacement | Nominal Output Voltage(s) Supported : 200V; 208V; 240V | Nominal Input Voltage(s) Supported : 200V AC; 208V AC; 240V AC | Crest Factor : 0.125694444444444 | Battery Recharge Rate (Included Batteries) : Less than 6 hours from 10% to 90% (typical, full load discharge) | Operating Elevation (ft.) : 0-3000m (0 to 10,000 ft.) | LED Indicators : 6 LEDs indicate line power, online mode, bypass mode, on-battery, charger and AC output status; LCD screen offers additional information and control options | Audible Alarm : Unique audible alarms for all major UPS, environmental and power conditions (see manual) | EMI / RFI AC Noise Suppression : Yes | Output Watt Capacity (Watts) : 18000 | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Output Circuit Breakers : Two built-in 30A breakers protect one L6-30R outlet each; Eight built-in 20A breakers protect one C19 outlet each | Nominal Voltage Details : Voltage selection via front panel LCD interface | Output kVA Capacity (kVA) : 20 | High Voltage Transfer to Battery Power (Setpoint) : 300V | DC System Voltage (VDC) : 240 | Operating Elevation (m) : 0-3000 m | Output Volt Amp Capacity (VA) : 20000 | Network Management Cards : SNMPWEBCARD; TLNETCARD; WEBCARDLX; MODBUSCARD; RELAYIOCARD | Battery Mode BTU / Hr. (Full Load) : 9185 | AC Mode BTU / Hr. (Full Load) : 6830 | Cooling Method : Fans | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | Output Voltage Regulation (Battery Mode) : +/- 2% | Alarm Cancel Operation : Alarm cancel switch | UPS Certifications : Tested to UL1778 (USA); Tested to CSA (Canada); Meets FCC Part 15 Category A (EMI) | Recommended Electrical Service : 125A @ 200V, 208V, or 240V (L1, L2, G) | High Availability UPS Features : Automatic inverter bypass; Battery Independent Restart; Hot swappable UPS power module; Hot swappable batteries; Manual bypass switch | Output AC Waveform (Battery Mode) : Pure Sine wave | UPS Housing Material : Steel | UPS AC Suppression Response Time : Instantaneous | Installation Form Factors Supported with Optional Accessories : 2 post rackmount (2POSTRMKITHD); Tower (2-9USTAND) | Output Capacity Details : Supports up to 105% load continuously in double conversion mode, 106 to 125% for 1 minute, 126% to 150% for 30 seconds; Loads over 150% trigger immediate bypass mode operation to support loads directly from mains power; Double conversion mode is automatically restored as load levels are reduced to 95% or less | Low Voltage Transfer to Battery Power (Setpoint) : 100V | Audible Noise : 60 dBA at front side 1 meter | AC Mode Efficiency Rating (100% Load) : 0.9 | Expandable Battery Runtime : Runtime is expandable with external battery packs | UPS Input Connection Type : Hardwire | Output AC Waveform (AC Mode) : Pure Sine wave | Overvoltage Correction : Corrects overvoltages up to 300V | Battery Replacement Description : Hot-swappable, user replaceable external battery packs | External Battery Pack Compatibility : BP240V10RT3U; BP240V787C-1PH | Output kW Capacity (kW) : 18 | Voltage Regulation Description : 2% output voltage regulation in standard online, double-conversion mode | UPS AC Suppression Joule Rating : 2565 | UPS Certification Details : IEC 61000-4-5 1995 B Surge Immunity | Output Voltage Regulation (Line Mode) : +/- 2% | Individually Controllable Load Banks : No | Output Receptacles : (2) L6-30R; (8) C19 | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Communications Cable : USB, DB9 serial and EPO cables included | Frequency Compatibility Details : Output frequency matches input nominal on startup; Frequency conversion mode enables conversion of 60Hz to 50Hz or 50Hz to 60Hz (no de-rating) | Rated input current (Maximum Load) : 112.2A (200V), 108A (208V), 102A (220V), 97.6A (230V), 93.6A (240V) | Primary Form Factor : Rackmount | Expandable Runtime Description : For best results, add external batteries in multiples of two so that both included 10kVA power modules have an equal number and type of connected battery packs | Emergency Power OFF : Yes | Typical Battery Recharge Time : 8 Hour | USB : Yes | Bypass Switch : Automatic, Manual | Load Capacity : 20 kVA | Network Management : SNMP Manageable | Output Frequency : 60 Hz | Plug/Connector Type : Hardwired | Additional Information : Output Receptacles: 8 x C19 | Package Contents : SmartOnline EZ SU20KRT 20kVA Tower/Rack Mountable UPS, 2 x Power Modules, 2 x Battery Packs, L6-30R / C19 parallel PDU with Bypass switch, PowerAlert Software CD, USB Cable, Serial Cable, EPO Cable, 4 x Sets of Adjustable 4 Post Rack Rails | Serial Port : Yes | Modular Slots : Communications Slot | Input Frequency : 60 Hz | Form Factor : Rack/Tower | Product Series : EZ | Receptacle Detail : 2 x NEMA L6-30R | Product Line : SmartOnline | Product Name : SmartOnline EZ SU20KRT 20kVA Tower/Rack Mountable UPS | Software Included : PowerAlert Software | Package Includes : Two SU10000RT3UPM UPS power modules;Two BP240V10RT3U battery packs;SUPDMB20K parallel PDU with Bypass switch;4-post rackmount installation kits;USB, DB9 & EPO Cabling | UPS Applications : Mission Critical Applications | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 9185 | Output Capacity (Watts) : 18000 | Output Capacity (VA) : 20000 | Product Compliance : FCC Part 15 Class A (USA) | Product Certifications : IEC 61000; CSA (Canada); UL 1778

Dimensions:

Height : 5.1 in | Depth : 26 in | Width : 17.5 in | Primary UPS Depth (mm) : 656 | UPS Dimensions Details : Includes 2 SU10000RT3UPM UPS/Power modules, 2 BP240V10RT3U Battery packs and SUPDMB20K parallel bypass PDU; Listed weights and dimensions for UPS/Power module and Included battery pack each refer to a single unit; MAXIMUM DEVICE DEPTH specification refers to the whole UPS installed depth with parallel bypass PDU installed | Rack Height : 12U | Primary UPS Width (mm) : 445 | Primary UPS Height (mm) : 131 | Maximum Device Depth (in.) : 32.5 | UPS Power Module Dimensions (hwd, in.) : 5.14 x 17.5 x 25.82 | Minimum Required Rack Depth (inches) : 37.5 | Unit Dimension Details : Includes 2 SU10000RT3UPM UPS/Power modules, 2 BP240V10RT3U Battery packs and SUPDMB20K parallel bypass PDU; Listed weights and dimensions for UPS/Power module and Included battery pack each refer to a single unit; MAXIMUM DEVICE DEPTH specification refers to the whole UPS installed depth with parallel bypass PDU installed