Smart UPS, Out: 230V AC , In:230V AC - SMX3000XLRT2UA

Description:

UPS,SmartPro,3kVA,2.7kW,LCD,USB,DB9,2U

Details:

Item : Smart UPS | UPS Type : Line Interactive | Input Voltage : 230V AC | Output Voltage : 230V AC | Backup Time (Half/Full Load) : 11.10 min/3.90 min | Transfer Time : 6 milliseconds (AC to battery mode), 1 millisecond (Battery to AC mode) | Input Current : 14.10 A | Battery Type : Valve Regulated Lead Acid (VRLA) | Low Voltage Transfer to Battery Power (Setpoint) : 158 | UPS Certifications : CE | Battery Access : Front panel battery access door | Network Management Cards : SNMPWEBCARD ; TLNETCARD ; WEBCARDLX ; RELAYIOCARD | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | AC Mode BTU / Hr. (Full Load) : 158 | Output Volt Amp Capacity (VA) : 3000 | Internal UPS Replacement Battery Cartridge : RBC58-2U | Communications Interface : USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | Frequency Compatibility : 50 / 60 Hz | Load Management Receptacles : Two switchable single outlet C13 load banks | Alarm Cancel Operation : Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available | Expandable Runtime : Yes | UPS Input Connection Description : IEC320-C20 input connection accepts a variety of user supplied detachable C19 output cordsets to match country or site specific power sources | Battery Mode BTU / Hr. (Full Load) : 1501 | UPS Housing Material : Steel | Communications Cable : USB, DB9 and EPO cabling included | Battery Recharge Rate (Included Batteries) : Less than 5 hours from 10 to 90% (typical, full load discharge) | Included Output Power Cables : Set of 3 C13 to C14 power cables included | Output kW Capacity (kW) : 2.7 | Output Voltage Regulation (Battery Mode) : +/-5% | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 158 to 278 | Output Receptacles : (8) C13; (1) C19 | Included Mounting Accessory Description : Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm) | Installation Form Factors Supported with Included Accessories : 4 post 19 inch rackmount | Expandable Battery Runtime : Extended runtime supported via optional external battery packs | Undervoltage Correction : Input voltages between 206 and 183 are boosted by 12% | Severe Undervoltage Correction : Input voltages between 158 and 183 are boosted by 24% | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | Audible Alarm : Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions | Power Factor : 0,9 | AC Mode Efficiency Rating (100% Load) : 0.98 | Front Panel LCD Display : Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) | DC System Voltage (VDC) : 48 | Relative Humidity : 0 to 95%, non-condensing | Input Circuit Breakers : 20A | Nominal Input Voltage(s) Supported : 230V AC | Installation Form Factors Supported with Optional Accessories : 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM ) | Audible Noise : 45 dBA maximum, front side 1m | Frequency Compatibility Details : Automatic frequency selection | Overvoltage Correction : Input voltages between 244 and 278 are reduced by 12% | EMI / RFI AC Noise Suppression : Yes | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | High Voltage Transfer to Battery Power (Setpoint) : 278 | Output Watt Capacity (Watts) : 2700 | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Cooling Method : Fan | Individually Controllable Load Banks : Yes | Output AC Waveform (Battery Mode) : Pure Sine wave | Nominal Voltage Details : 230v nominal inverter output voltage | PowerAlert Software : For local monitoring via the UPS™s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | High Availability UPS Features : Hot swappable batteries | AC Suppression Response Time : Instantaneous | External Battery Pack Compatibility : BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V27-2US (multi-pack compatible) | Output kVA Capacity (kVA) : 3 | UPS Input Connection Type : C20 inlet | Nominal Output Voltage(s) Supported : 220V; 230V; 240V | UPS Certification Details : IEC 62040-1, IEC 62040-2 Class A EMI, GOST | Rated input current (Maximum Load) : 14.1A | Input Phase : Single-Phase | Output AC Waveform (AC Mode) : Pure Sine wave | Output Voltage Regulation (Line Mode) : +6%, -15% | Switches : 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions | Battery Replacement Description : Hot-swappable, replaceable batteries | UPS AC Suppression Joule Rating : 350 | Primary Form Factor : Rackmount | Plug/Connector Type : IEC 60320 C20 | Receptacle Detail : 8 x IEC 60320 C13, 1 x IEC 60320 C19 | USB : Yes | Typical Battery Recharge Time : 5 Hour | Thermal Dissipation : 46.31 W | Hot Swappable : Yes | Product Line : SmartPro | Status Indicators : Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options | Protection Type : Over Voltage, Under Voltage, Black Out, Surge, EMI / RFI, Brownout | Package Contents : SMX3000XLRT2UA UPS System, PowerAlert Software CD, 4 Post Rackmount Installation Kit, 3 x C13/C14 Power Cables, Instruction Manual, USB Cable, DB9 Cable, EPO Cable | Product Name : SMX3000XLRT2UA UPS System | Waveform Type : Sine Wave | Serial Port : Yes | Certifications & Standards : CE, IEC 62040-1, IEC 62040-2 Class A EMI, GOST | Form Factor : Rack/Tower | Surge Energy Rating : 350 J | Emergency Power OFF : Yes | Load Capacity : 3000 VA/2700 W | Alarm : Power Failure, Low Battery, Remote Shutdown, Overload, UPS Fault, UPS StartUp | Software Included : PowerAlert Monitoring Software | Network Management : SNMP Manageable | Maximum Operating Temperature : 104°F (40°C) | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 1501 | Output Capacity (Watts) : 2700 | UPS Applications : Large Network; High-End Desktop/Small Network | Product Compliance : CE (Europe) | Output Capacity (VA) : 3000 | Product Certifications : GOST (Russia); IEC/EN 62040 | Package Includes : SMX3000XLRT2UA UPS system;USB, Serial & EPO cabling;4 post rackmount installation kit;Set of 3 C13/C14 power cables;Instruction manual

Dimensions:

Depth : 19.5 in | Width : 17.5 in | Height : 3.5 in | Rack Height : 2U | UPS Power Module Dimensions (hwd, in.) : 3.50 x 17.50 x 19.50 | Primary UPS Depth (mm) : 495 | Primary UPS Height (mm) : 89 | Minimum Required Rack Depth with External Battery Pack (in.) : 26.5 | Minimum Required Rack Depth without External Battery Pack (in.) : 23 | Primary UPS Width (mm) : 445 | Unit Dimensions (hwd / in.) : 3.500 x 17.500 x 19.500 | Minimum Required Rack Depth (inches) : 23