Smart UPS, Rack/Tower, Out: 120V AC , In:120V AC - SMART500RT1UTAA

Description:

UPS,SmartPro,500VA,300W,Rack/Tower,1U

Details:

Item : Smart UPS | UPS Type : Line Interactive | Mounting : Rack/Tower | Input Voltage : 120V AC | Output Voltage : 120V AC | Backup Time (Half/Full Load) : 14.60 min/3.20 min | Input Current : 5.60 A | Transfer Time : 2-4 milliseconds | Battery Type : Valve Regulated Lead Acid (VRLA) | UPS Certifications : Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI); TAA Compliant | Individually Controllable Load Banks : Yes | Primary Form Factor : Rackmount | Battery Recharge Rate (Included Batteries) : Less than 4 hours from 10% to 90% | Relative Humidity : 0 to 95%, non-condensing | Network UPS Tools Compatibility : NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite | Alarm Cancel Operation : Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status | Internal UPS Replacement Battery Cartridge : RBC62-1U | Output Receptacles : (6) 5-15R | Output AC Waveform (AC Mode) : Sine wave | Communications Interface : USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface | High Availability UPS Features : Hot swappable batteries | Included Mounting Accessory Description : Included mounting brackets provide front-rail installation in 2 or 4 post racks, plus upright tower configurations | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with input voltage as low as 90 | LED Indicators : 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status | UPS AC Suppression Joule Rating : 567 | UPS Output Receptacles (Surge Suppression Only) : 6 UPS outlets, 1 surge-only outlet | Output Voltage Regulation (Battery Mode) : +/- 5% | Rated input current (Maximum Load) : 5.6A | Output AC Waveform (Battery Mode) : PWM sine wave | Network Management Cards : SNMPWEBCARD ; TLNETCARD ; WEBCARDLX | AC Mode Efficiency Rating (100% Load) : 0.96 | Communications Cable : USB and DB9 cabling included | Battery Replacement Description : Hot-swappable, user replaceable batteries | Recommended Electrical Service : 15A 120V | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Output Volt Amp Capacity (VA) : 500 | Installation Form Factors Supported with Included Accessories : 4 post 19 inch rackmount; 2 post 19 inch rackmount | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | PowerAlert Software : For local monitoring via the UPS™s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | Low Voltage Transfer to Battery Power (Setpoint) : 90 | AC Mode BTU / Hr. (Full Load) : 44 | Grounding Lug : Back panel grounding lug | EMI / RFI AC Noise Suppression : Yes | UPS Housing Material : Steel | Undervoltage Correction : Input voltages between 90 and 108 are boosted by 14% | Expandable Runtime : No | AC Suppression Response Time : Instantaneous | Nominal Input Voltage(s) Supported : 120V AC | Output Voltage Regulation (Line Mode) : -15%, +13% | UPS Input Connection Type : 5-15P | Output Watt Capacity (Watts) : 300 | Frequency Compatibility : 60 Hz | DC System Voltage (VDC) : 12 | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | UPS Dataline Suppression : 1 line TEL/DSL (1 in / 1 out) | Input Circuit Breakers : 15A | Nominal Output Voltage(s) Supported : 110V; 115V; 120V | Battery Access : Battery access door | Input Phase : Single-Phase | Load Management Receptacles : One switchable single-outlet 5-15R load bank | Audible Noise : 45 dBA maximum, front side 1m | Audible Alarm : Audible alarm indicates power-failure, overload and low-battery conditions | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Nominal Voltage Details : 120v nominal output in battery mode | High Voltage Transfer to Battery Power (Setpoint) : 136 | AC Suppression Joule Rating : 567 | Switches : 2 Switches control off/on power status and alarm-cancel/self-test operation | Battery Management : Field-replaceable | Load Capacity : 500 VA/300 W | Package Contents : SmartPro SMART500RT1UTAA 500VA Tower/Rack Mountable UPS, Mounting Hardware, Cabling for USB & DB9 Monitoring and EPO Switching, Instruction Manual | Protection Type : Brownout, EMI / RFI, Transient, Line Noise, Surge | Alarm : Low Battery, Overload, Power Failure | Serial Port : Yes | TAA Compliant : Yes | Maximum Operating Temperature : 104°F (40°C) | Product Name : SmartPro SMART500RT1UTAA 500VA Tower/Rack Mountable UPS | USB : Yes | Emergency Power OFF : Yes | Certifications & Standards : TAA, GSA, UL1778 (USA), CSA (Canada), NOM (Mexico), FCC Part 15 Category B (EMI) | Receptacle Detail : 7 x NEMA 5-15R | Waveform Type : Sine Wave, Pulse-width Modulated Sine Wave | Surge Energy Rating : 567 J | Plug/Connector Type : NEMA 5-15P | Modem (RJ-11) : Yes | Status Indicators : LED | Product Line : SmartPro | Software Included : PowerAlert unattended shutdown and UPS/Power monitoring | Network (RJ-45) : Yes | Form Factor : Rack/Tower | Hot Swappable : Yes | Dataline Protection : RJ-11, RJ-45 | Installation Form Factors Supported with Optional Accessories : Vertical Mount Enclosures ( SRWF5U36 , SRWF5U , SRWF10UMOD ) | Product Compliance : FCC Part 15 Class B (USA); Trade Agreements Act (TAA) | Grounding Details : Back panel grounding lug | Package Includes : SMART500RT1UTAA UPS System;Mounting hardware;Cabling for USB & DB9 monitoring and EPO switching;Instruction manual | Output Capacity (VA) : 500 | Product Certifications : CSA (Canada); NOM (Mexico); UL 1778 | UPS Applications : Large Network; High-End Desktop/Small Network | Output Capacity (Watts) : 300

Dimensions:

Depth : 11.8 in | Height : 1.7 in | Width : 17.5 in | Cord Length : 10 ft | Primary UPS Width (mm) : 440 | Minimum Required Rack Depth (inches) : 14.26 | UPS Input Cord Length (ft.) : 10 | Primary UPS Height (mm) : 44 | Primary UPS Depth (mm) : 286 | UPS Power Module Dimensions (hwd, in.) : 1.73 x 17.32 x 11.26 | Rack Height : 1U