Smart UPS, Rack/Tower, Out: 120V AC , In:120V AC - SMC10002URM

Description:

UPS,SmartPro,1kVA,700W,Rack/Tower,LCD,2U

Details:

Item : Smart UPS | UPS Type : Line Interactive | Mounting : Rack/Tower | Input Voltage : 120V AC | Output Voltage : 120V AC | Backup Time (Half/Full Load) : 15.60 min/6.40 min | Input Current : 9.20 A | Transfer Time : 4 milliseconds (AC to battery), 1 milliseconds (Battery to AC) | Battery Type : Valve Regulated Lead Acid (VRLA) | Output kVA Capacity (kVA) : 1 | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | Primary Form Factor : Rackmount | Operating Elevation (m) : 0 - 3000 m | UPS Certifications : Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI) | UPS AC Suppression Joule Rating : 570 | Frequency Compatibility : 60 Hz | PowerAlert Software : For local monitoring via the UPS™s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | Audible Noise : 45 dBA maximum, front side 1m | Battery Mode BTU / Hr. (Full Load) : 455 | Output Receptacles : (6) 5-15R | Installation Form Factors Supported with Included Accessories : 2 post 19 inch rackmount; 4 post 19 inch rackmount; Wallmount | Communications Interface : DB9 Serial; EPO (emergency power off); USB | High Availability UPS Features : Hot swappable batteries | Internal UPS Replacement Battery Cartridge : RBC24V-LCD | Alarm Cancel Operation : Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available | Communications Cable : USB cabling included | Input Phase : Single-Phase | Nominal Voltage Details : 120v nominal output in battery mode | DC System Voltage (VDC) : 24 | Undervoltage Correction : Input voltages between 83 and 107 are boosted by 14% | Recommended Electrical Service : 15A 120V | Low Voltage Transfer to Battery Power (Setpoint) : 83 | Network UPS Tools Compatibility : NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite | Audible Alarm : Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions | AC Mode BTU / Hr. (Full Load) : 122 | Nominal Output Voltage(s) Supported : 110V; 115V; 120V | Relative Humidity : 0 to 95%, non-condensing | UPS Input Connection Type : 5-15P | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Output AC Waveform (AC Mode) : Sine wave | Nominal Input Voltage(s) Supported : 120V AC | EMI / RFI AC Noise Suppression : Yes | Battery Recharge Rate (Included Batteries) : Less than 4.5 hours from 10% to 90% (typical, full load discharge) | Output Voltage Regulation (Line Mode) : -21%, +8% | Grounding Lug : Back panel grounding lug | Operating Elevation (ft.) : 0-3000M (0-10,000 Ft) | Battery Access : Front panel battery access door | Switches : 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147 | AC Mode Efficiency Rating (100% Load) : 0.95 | High Voltage Transfer to Battery Power (Setpoint) : 147 | Expandable Runtime : No | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Individually Controllable Load Banks : No | Output Watt Capacity (Watts) : 700 | Cooling Method : Fan | UPS Housing Material : Steel | UPS AC Suppression Response Time : Instantaneous | Overvoltage Correction : Input voltages between 128 and 147 are reduced by 12% | Battery Replacement Description : Hot-swappable, user replaceable batteries | Input Circuit Breakers : 10A | Output Volt Amp Capacity (VA) : 1000 | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | Power Factor : 0.7 | Output AC Waveform (Battery Mode) : Pure Sine wave | Front Panel LCD Display : Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) | Output Voltage Regulation (Battery Mode) : +/- 5% | Included Mounting Accessory Description : Includes UPSHDEARKIT for 2 point front-mount and 2 point center-mount rackmount installation in 2 and 4 post racks, plus wallmount installation; For additional stability in 4 post racks, consider optional 4 post mounting accessories 4POSTRAILKIT and 4POSTRAILKITWM | Rated input current (Maximum Load) : 9.2A | Installation Form Factors Supported with Optional Accessories : 4 post rackmount full-depth ( 4POSTRAILKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ) | Product Line : SmartPro | Load Capacity : 1000 VA/700 W | Certifications & Standards : UL Listed Certification | Surge Energy Rating : 570 J | Status Indicators : LEDs | Package Contents : SMC10002URM UPS System, USB Cable, 2 & 4 Post Rackmount Installation Hardware, Instruction Manual | Plug/Connector Type : NEMA 5-15P | Maximum Operating Temperature : 104°F (40°C) | Product Name : Line-interactive UPS Power Supply | Serial Port : Yes | Receptacle Detail : 6 x NEMA 5-15R | Emergency Power OFF : Yes | Sound Emission : 45 dB | Hot Swappable : Yes | USB : Yes | Waveform Type : Sine Wave, Pure Sine Wave | Thermal Dissipation : 35.75 W | Assembly Required : No | Protection Type : Surge, Brownout, Black Out, Under Voltage, Over Voltage, EMI / RFI | Battery Management : user-replaceable | Circuit Breaker : Yes | Alarm : Low Battery, Power Failure, Remote Shutdown, Overload, UPS StartUp, UPS Fault | Form Factor : Rack/Tower | Output Capacity (Watts) : 700 | Product Certifications : CSA (Canada); NOM (Mexico); UL 1778 | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 455 | Product Compliance : FCC Part 15 Class B (USA) | Package Includes : SMC10002URM SmartPro® 120V 1kVA 700W Line-Interactive Sine Wave UPS;USB cable;UPSHDEARKIT mounting hardware;Owner's manual | Output Capacity (VA) : 1000 | Grounding Details : Back panel grounding lug | UPS Applications : Audio/Video; Large Network; High-End Desktop/Small Network; Retail/Point of Sale; Hospitality

Dimensions:

Width : 17.4 in | Depth : 12.5 in | Cord Length : 9.84 ft | Height : 3.5 in | Minimum Required Rack Depth (inches) : 15.5 | UPS Input Cord Length (ft.) : 10 | Primary UPS Height (mm) : 88 | UPS Power Module Dimensions (hwd, in.) : 3.45 x 17.35 x 12.5 | Primary UPS Depth (mm) : 318 | Primary UPS Width (mm) : 441 | Rack Height : 2U