TRIPP LITE Smartonline .75Kva On-Line Double-Conversion Ups, 2U Rack/Tower, - SU750RTXLCD2U

Description:



Details:

Item : Smart UPS | UPS Type : Online | Mounting : Rack/Tower | Backup Time (Half/Full Load) : 13.9 min/4.3 min | Transfer Time : Zero (0 milliseconds) in double-conversion mode; 4 milliseconds economy mode | Input Current : 6.2A | Battery Type : Valve Regulated Lead Acid (VRLA) | Expandable Runtime : Yes | Low Voltage Transfer to Battery Power (Setpoint) : 100V at full load (90V full load at 100V nominal setting); 70V at 70% load; 55V at 33% load | AC Economy Mode Efficiency Rating (100% Load) : 0.93 | Internal UPS Replacement Battery Cartridge : RBC24V-LCD | LED Indicators : 7 front panel LEDs indicate line power availability, AC to DC conversion, battery mode operation, inverter mode, eco mode operation, bypass mode operation and AC output status | UPS AC Suppression Response Time : Instantaneous | PowerAlert Software : For local monitoring via the UPS™s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | Primary Form Factor : Rackmount | UPS Certifications : Tested to UL1778 (USA); Tested to CSA (Canada); Meets FCC Part 15 Category B (EMI) | Overvoltage Correction : Corrects overvoltages to 150V (0-100% load) | Output Voltage Regulation (Battery Mode) : +/- 3% | EMI / RFI AC Noise Suppression : Yes | Battery Mode BTU / Hr. (Full Load) : 439 | Expandable Battery Runtime : Extended runtime supported via optional external battery packs | Output Receptacles : (6) 5-15R | Audible Alarm : Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions | Installation Form Factors Supported with Included Accessories : 4 post 19 inch rackmount | Crest Factor : 0.125694444444444 | High Availability UPS Features : Automatic inverter bypass; Battery Independent Restart; Hot swappable batteries | Input Circuit Breakers : 15A | Relative Humidity : 0 to 95%, non-condensing | UPS AC Suppression Joule Rating : 570 | Operating Elevation (m) : Up to 3000m | Output AC Waveform (AC Mode) : Pure Sine wave | Switches : 2 switches control off/on power status and alarm-cancel operation; 2 additional scroll-down and scroll-up / select options enable LCD status viewing and configuration options | Frequency Compatibility : 50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion | Frequency Compatibility Details : ON LINE MODE: Output frequency is automatically configured to match nominal input frequency on startup; Output matches input frequency when +/-5Hz of nominal; Output is regulated to +/-0.05Hz when input frequency exceeds +/-5Hz of nominal. UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. FREQUENCY REGULATION / CONVERSION MODE: Output is regulated to +/-0.05Hz of selected output frequency input is 40 to 70Hz; UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. BATTERY MODE: Output is regulated to +/-0.05Hz. | Output Watt Capacity (Watts) : 675 | AC Economy Mode BTU / Hr. (Full Load) : 173 | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | Rated input current (Maximum Load) : 8A | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Output Voltage Regulation (Economy Line Mode) : +/- 10% | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 and contact closure communications | Output AC Waveform (Battery Mode) : Pure Sine wave | AC Mode BTU / Hr. (Full Load) : 256 | External Battery Pack Compatibility : BP24V15RT2U (limit 1); BP24V28-2U (limit 1); BP24V70-3U (multi-pack compatible); BP24V36-2US (multi-pack compatible) | Battery Access : Front panel battery access | Output kVA Capacity (kVA) : 0.75 | Expandable Runtime Description : Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software, see manual for details | Communications Cable : USB and DB9 cabling included | Cooling Method : Fan | Output Capacity Details : ON LINE MODE: Maximum output capacity is reduced to 608 watts at 100V nominal; FREQUENCY CONVERSION MODE: Maximum output ratings are reduced in frequency regulation / conversion mode (127/120/115/110V: 472 watts / 100V: 425 watts) OVERLOAD CAPACITY: Supports inverter operation up to 105% load continuously, 125% load for 3 minutes; 150% load for 30 seconds and >150% load for 0.5 seconds before switching to BYPASS (when bypass input voltage and frequency are WITHIN bypass limits) or SHUTDOWN (when bypass input voltage or frequency are OUTSIDE bypass limits) | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Nominal Input Voltage Description : 120V factory default | Undervoltage Correction : Corrects undervoltages to 100V at full load (90V at 100V nominal) | Output Voltage Regulation (Line Mode) : +/- 2% | Input Phase : Single-Phase | Severe Undervoltage Correction : Corrects brownouts to 70V (70% load) & 55V (33% load) | DC System Voltage (VDC) : 24 | Voltage Regulation Description : Online, double-conversion power conditioning maintains 2% output voltage regulation during brownouts and overvoltages | Output Volt Amp Capacity (VA) : 750 | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Alarm Cancel Operation : Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available | Included Mounting Accessory Description : Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm) | Installation Form Factors Supported with Optional Accessories : 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM ) | Communications Interface : USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface | UPS Housing Material : Steel | High Voltage Transfer to Battery Power (Setpoint) : 150 | Power Factor : 0.9 | Nominal Voltage Details : 120V factory-default nominal voltage | Individually Controllable Load Banks : Yes | Nominal Input Voltage(s) Supported : 100V AC; 110V AC; 115V AC; 120V AC; 127V AC | Battery Recharge Rate (Included Batteries) : Less than 3 hours recharge to 90% (typical, full load discharge) | Recommended Electrical Service : 15A 120V | Nominal Output Voltage(s) Supported : 100V; 110V; 115V; 120V; 127V | Audible Noise : 45 dBA at 1m front side | Load Management Receptacles : Two switchable single-outlet 5-15R load banks | UPS Input Connection Type : 5-15P | Front Panel LCD Display : Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, frequency, operating mode, alarm function and a variety of additional options | UPS Dataline Suppression : 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet | Network Management Cards : SNMPWEBCARD ; TLNETCARD ; WEBCARDLX ; MODBUSCARD | Battery Replacement Description : Hot-swappable, user replaceable batteries | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 440 | Package Includes : 750VA 675W 120V Double-Conversion UPS;USB cable;DB9 cable;Rack-mounting hardware;Tower support stands;Safety instructions;Quick start guide | UPS Applications : Mission Critical Applications | Output Capacity (Watts) : 675 | Output Capacity (VA) : 750 | Product Compliance : CE (Europe); FCC (USA) | AC Mode Efficiency Rating (100% Load) : 89.9 | Product Certifications : UL Listed; cUL Listed | Online Mode Heat Dissipation (BTU/Hr) @ Full Load : 241 | Plug Type : 5-15P | Power Factor (Input) : 0.99

Dimensions:

UPS Input Cord Length (ft.) : 10 | Rack Height : 2U | Primary UPS Width (mm) : 445 | Minimum Required Rack Depth without External Battery Pack (in.) : 15.5 | Primary UPS Height (mm) : 89 | Minimum Required Rack Depth with External Battery Pack (in.) : 15.5 | UPS Power Module Dimensions (hwd, in.) : 3.5 x 17.5 x 12.5 | Primary UPS Depth (mm) : 318 | Minimum Required Rack Depth (inches) : 20.7 | Unit Dimensions (hwd / in.) : 3.410 x 17.330 x 17.720