UPS System, 1.05 kVA, 8 Outlets, Desktop/Tower, Out: 100/110/120V AC , In:120V AC - SMART1050SLT

Description:

UPS System, Line Interactive, Power Rating 1.05 kVA, Wattage 650 W, Input Voltage 120V AC, Output Voltage 100V AC, 110V AC, 120V AC, Backup Time (Half/Full Load) 19 min/7 min, Mounting Desktop/Tower, Outlet Type UPS/Surge, Number of Outlets 8, Medical Grade No, NEMA Receptacle Configuration 5-15R, NEMA Plug Configuration 5-15P, Automatic Volts Regulation Yes, Fax/Modem Line Protection Yes, Transfer Time 4 to 6 msec, Width 7 in, Depth 13 in, Height 10 in, Cord Length 6 ft, Display Type LED

Details:

Item : UPS System | UPS Type : Line Interactive | Power Rating : 1.05 kVA | Mounting : Desktop/Tower | Wattage : 650 W | Input Voltage : 120V AC | Output Voltage : 100/110/120V AC | Backup Time (Half/Full Load) : 19 min/7 min | Outlet Type : UPS/Surge | Medical Grade : No | Number of Outlets : 8 | Transfer Time : 4 to 6 msec | NEMA Receptacle Configuration : 5-15R | Footnotes : Slot for SNMPWEBCARD | Input Current : 6.1 A | Ports : RS232, Slot for SNMPWEBCARD, TEL/DSL, USB | Automatic Volts Regulation : Yes | Includes : USB and Serial Cables | NEMA Plug Configuration : 5-15p | Fax/Modem Line Protection : Yes | Hz : 50/60 Hz | Phase : 1 | Green Environmental Attribute : Product Contributes To Reducing Energy Consumption | Special Features : Hot Swappable Batteries | Display Type : LED | Standards : UL 1778 | Green Certification or Other Recognition : UL1778 (USA), cUL (Canada), FCC Class B (emissions), IEC 1000-4-2 Level 3 (Electrostatic Discharge), IEC 1000-4-4 Level 2 (Fast Transient / Burst), IEC 1000-4-5 Level 3 (Lightning Surge), Conforms to IEEE 587 / ANSI C62.41 specifications | Capacity - Batteries : 1050 VA/650 W | Operating Temp. Range : 104°F (40°C) | Battery Type : Sealed Lead Acid (SLA) | Input Connection : NEMA 5-15P Plug | Communications Interface : USB (HID enabled); DB9 Serial; Slot for SNMP/Web interface | Frequency Compatibility Details : Automatic frequency selection | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 95 to 145 (120v), 87 to 133 (110v), 83 to 121 (100v) | UPS Certifications : Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI) | Battery Mode BTU / Hr. (Full Load) : 455 | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius. | Frequency Compatibility : 50 / 60 Hz | Battery Access : Battery access door | UPS AC Suppression Response Time : Instantaneous | Nominal Output Voltage(s) Supported : 100V; 110V; 120V | Nominal Voltage Details : 120V default (voltage selection via back panel switches) | LED Indicators : Status LEDs indicate line power, battery power, AVR, overload and replace battery status - with a 3-LED level meter for load and battery charge level | Input Phase : Single-Phase | Site Wiring Fault Indication : Rear panel site wiring fault LED | UPS Housing Material : Steel | High Voltage Transfer to Battery Power (Setpoint) : 145V (120V), 133V (110V), 121V (100V) | Battery Replacement Description : Hot-swappable, user replaceable batteries | Relative Humidity : 0 to 95%, non-condensing | Output Voltage Regulation (Line Mode) : -13%, + 15% | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications. | Primary Form Factor : Tower | Low Voltage Transfer to Battery Power (Setpoint) : 95V (120V), 87V (110V), 83V (100V) | Nominal Input Voltage(s) Supported : 100V AC; 110V AC; 120V AC | DC System Voltage (VDC) : 24 | Internal UPS Replacement Battery Cartridge : RBC24-SLT | Rated input current (Maximum Load) : 6.1A (120V), 6.6A (110V), 7.2A (100V) | EMI / RFI AC Noise Suppression : Yes | Output Volt Amp Capacity (VA) : 1050 | Switches : 2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches support nominal voltage selection | Output Voltage Regulation (Battery Mode) : +/- 5% | Battery Recharge Rate (Included Batteries) : Less than 6 hours from 10% to 90% (typical, full load discharge) | Individually Controllable Load Banks : No | Cooling Method : Fan | UPS AC Suppression Joule Rating : 690 | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Expandable Runtime : No | Recommended Electrical Service : 15A 120V | AC Mode BTU / Hr. (Full Load) : 107 | Alarm Cancel Operation : Power-fail alarm can be silenced using alarm-cancel switch | Audible Alarm : Audible alarm indicates power failure and overload conditions | UPS Input Connection Type : 5-15P | Output Receptacles : (8) 5-15R | Overvoltage Correction : Voltage reduction of 12% applies when input is 127 to 145 (120v), 116 to 133 (110v), 111 to 121 (100v) | AC Mode Efficiency Rating (100% Load) : 0.95 | Audible Noise : Audible Noise < 50 dBA at Front Side 1 Meter | UPS Dataline Suppression : 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet | Output AC Waveform (Battery Mode) : Pure Sine wave | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius. | Undervoltage Correction : Voltage boost of 14% applies when input is 95 to 108 (120v), 87 to 99 (110v), 83 to 90 (100v) | Output kVA Capacity (kVA) : 1.05 | Output AC Waveform (AC Mode) : Sine wave | Network Management Cards : SNMPWEBCARD ; WEBCARDLX ; RELAYIOCARD | PowerAlert Software : For local monitoring via the UPSâ„¢s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | Communications Cable : USB and DB9 cabling included | High Availability UPS Features : Hot swappable batteries | Network UPS Tools Compatibility : NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite | Output Watt Capacity (Watts) : 650 | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | Battery Chemistry : Lead Acid | Product Name : SMART1050SLT SmartPro 120V 1.05kVA 650W Line-Interactive Sine Wave UPS | Typical Battery Recharge Time : 4 Hour | Status Indicators : Includes 14 front panel LEDs to indicate line / battery power status, over / under voltage correction, battery charge level (4 LEDs), load percentage (4 LEDs), overload and replace battery. Also includes 1 rear panel site wiring fault indicator. | USB : Yes | Certifications & Standards : UL1778 (USA), cUL (Canada), FCC Class B (emissions), IEC 1000-4-2 Level 3 (Electrostatic Discharge), IEC 1000-4-4 Level 2 (Fast Transient / Burst), IEC 1000-4-5 Level 3 (Lightning Surge), Conforms to IEEE 587 / ANSI C62.41 specifications | Hot Swappable : Yes | Load Capacity : 1050 VA/650 W | Battery Life : 6 Year | Plug/Connector Type : NEMA 5-15P | Form Factor : Tower | Waveform Type : Sine Wave | Maximum Operating Temperature : 104°F (40°C) | Total Number of Expansion Slots : 1 | Receptacle Detail : 8 x NEMA 5-15R | Product Line : SmartPro | Network Management : SNMP Manageable | Package Contents : SMART1050SLT SmartPro 120V 1.05kVA 650W Line-Interactive Sine Wave UPS, USB cable, DB9 cable, PowerAlert software, Owner's manual | Alarm : On Battery, Overload | UPS Applications : Large Network; High-End Desktop/Small Network; Retail/Point of Sale; Hospitality | Operating Elevation (ft.) : 6561 ft. (2000 m) above sea level | Product Certifications : CSA (Canada); NOM (Mexico); UL 1778 | Output Capacity Details : 5.4A @ 120V (default), 5.9A @ 110V, 6.5A @ 100V. 125% @ 10 minutes 110% +/- 10% @ 5 seconds | Total Harmonic Distortion : 0.03 | Output Capacity (VA) : 1050 | Package Includes : SMART1050SLT SmartPro 120V 1.05kVA 650W Line-Interactive Sine Wave UPS;USB cable;DB9 cable;Owner's manual | Installation Form Factors Supported with Included Accessories : Tower | Output Capacity (Watts) : 650 | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 455 | Power Factor : 0.62 | Product Compliance : FCC Part 15 Class B (USA)

Dimensions:

Cord Length : 6 ft | Width : 7 in | Depth : 13 in | Height : 10 in | UPS Input Cord Length (ft.) : 6 | Primary UPS Depth (mm) : 335 | Primary UPS Width (mm) : 173 | UPS Power Module Dimensions (hwd, in.) : 10.2 x 6.8 x 13.2 | Primary UPS Height (mm) : 259