UPS System, 1.5 kVA, 8 Outlets, Rack, Out: 120V AC , In:120V AC - SMART1500RM2UN

Description:

UPS System, Line Interactive, Power Rating 1.5 kVA, Wattage 1.35 kW, Input Voltage 120V AC, Output Voltage 120V AC, Backup Time (Half/Full Load) 13 min/4.5 min, Mounting Rack, Outlet Type UPS/Surge, Number of Outlets 8, Medical Grade No, NEMA Receptacle Configuration 5-15R, NEMA Plug Configuration 5-15P, Automatic Volts Regulation Yes, Fax/Modem Line Protection No, Transfer Time 2 to 4 msec, Width 18 in, Depth 13 in, Height 4 in, Cord Length 10 ft, Display Type LCD, 60 Hz Hz, Input Current 12 A

Details:

Item : UPS System | UPS Type : Line Interactive | Power Rating : 1.5 kVA | Mounting : Rack | Wattage : 1.35 kW | Input Voltage : 120V AC | Output Voltage : 120V AC | Backup Time (Half/Full Load) : 13 min/4.5 min | Outlet Type : UPS/Surge | Medical Grade : No | Number of Outlets : 8 | Ports : DB9 Serial, EPO, USB | NEMA Receptacle Configuration : 5-15R | Hz : 60 Hz | Special Features : Hot Swappable Batteries, Individually Controllable Load Banks | Standards : UL | NEMA Plug Configuration : 5-15p | Phase : 1 | Input Current : 12 A | Transfer Time : 2 to 4 msec | Display Type : LCD | Includes : 4-Post Rack Mount Installation Kit, PowerAlert Software with USB, Serial and EPO Cables | Fax/Modem Line Protection : No | Green Environmental Attribute : Product Contributes To Reducing Energy Consumption | Automatic Volts Regulation : Yes | Green Certification or Other Recognition : UL1778CSANOMFCC Part 15 Category B (EMI) | For Use with : Server, Telecommunication, Storage Device | Capacity - Batteries : 1500 VA/1350 W | Input Connection : NEMA 5-15P Plug | Battery Type : Valve Regulated Lead Acid (VRLA) | EMI / RFI AC Noise Suppression : Yes | Nominal Voltage Details : 120v nominal output in battery mode | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Rated input current (Maximum Load) : 12A | UPS Input Connection Type : 5-15P | EPO Port : RJ11 interface jack with 4 meter cable included. Supports normally open and normally closed EPO systems | UPS Certifications : Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI) | Audible Noise : 45 dBA maximum, front side 1m | Battery Access : Front panel battery access door | Individually Controllable Load Banks : Yes | Nominal Input Voltage(s) Supported : 120V AC | LED Indicators : Network Link/Activity (Green): Flashes for network activity. Network Speed (Yellow): 10 Mbps (Flashing), 100 Mbps (On steady). LX Platform Interface Status: Normal Operation (Solid Green); Software Update (Alternating Green/Orange ~1/sec); Factory Reset (Alternating Green/Orange ~2/sec). | UPS AC Suppression Joule Rating : 570 | Network UPS Tools Compatibility : NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite | Output kVA Capacity (kVA) : 1.5 | Battery Replacement Description : Hot-swappable, user replaceable batteries | Recommended Electrical Service : 15A 120V | Undervoltage Correction : Input voltages between 83 and 107 are boosted by 14% | Network Monitoring Port Description : Includes Pre-installed WEBCARDLX Network Management interface card. RJ45 Network port, Micro-USB Configuration/Console port, USB A port supports a variety of Envirosense2 environmental and control modules. See Accessories>Management Hardware section for more information about these modules. | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | Switches : 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions. LX Platform Interface: Recessed reset switch for interface reboot and factory reset. | Output kW Capacity (kW) : 1.35 | Output Watt Capacity (Watts) : 1350 | High Voltage Transfer to Battery Power (Setpoint) : 147 | Communications Cable : Micro-USB, USB, and DB9 cabling included | Installation Form Factors Supported with Optional Accessories : 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM ) | Frequency Compatibility : 60 Hz | DC System Voltage (VDC) : 36 | Output AC Waveform (AC Mode) : Sine wave | Power Factor : 0.9 | Relative Humidity : 0 to 95%, non-condensing | Battery Mode BTU / Hr. (Full Load) : 1012 | Grounding Lug : Back panel grounding lug | Audible Alarm : Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions | AC Mode BTU / Hr. (Full Load) : 267 | Primary Form Factor : Rackmount | Nominal Output Voltage(s) Supported : 110V; 115V; 120V | UPS AC Suppression Response Time : Instantaneous | SNMP Compatibility : SNMPv1, V2c, V3 | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Communications Interface : DB9 Serial; EPO (emergency power off); Pre-installed network card; USB (HID enabled) | Input Circuit Breakers : 15A | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Expandable Runtime : No | Network Speed : 10/100 Mbps | UPS Housing Material : Steel | Internal UPS Replacement Battery Cartridge : RBC93-2U | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147 | PowerAlert Software : For local monitoring via the UPSâ„¢s built-in Serial or USB communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | Output Receptacles : (8) 5-15R | Output AC Waveform (Battery Mode) : Pure Sine wave | Input Phase : Single-Phase | Output Voltage Regulation (Line Mode) : -21%, +8% | Front Panel LCD Display : Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) | Overvoltage Correction : Input voltages between 128 and 147 are reduced by 12% | Battery Recharge Rate (Included Batteries) : Less than 4.5 hours from 10% to 90% (typical, full load discharge) | AC Mode Efficiency Rating (100% Load) : 0.95 | High Availability UPS Features : Hot swappable batteries | Included Mounting Accessory Description : Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm) | Output Volt Amp Capacity (VA) : 1500 | Installation Form Factors Supported with Included Accessories : 4 post 19 inch rackmount | Low Voltage Transfer to Battery Power (Setpoint) : 83 | Cooling Method : Fan | Output Voltage Regulation (Battery Mode) : +/- 5% | Alarm Cancel Operation : Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available | Load Management Receptacles : Two switchable two-outlet 5-15R load banks | USB : Yes | Application/Usage : Telecommunication, Storage Device, Server | Network Management : SNMP Manageable | Package Contents : SMART1500RM2UN UPS System with Pre-installed SNMPWEBCARD, Pre-installed WEBCARDLX network interface, USB cable, DB9 cable, EPO cable, Mounting hardware, Owner's manual | Certifications & Standards : UL1778, CSA, NOM, FCC Part 15 Category B (EMI) | Form Factor : Rack/Tower | Software Included : PowerAlert Software | Serial Port : Yes | Product Line : SmartPro | Receptacle Detail : 8 x NEMA 5-15R | Typical Battery Recharge Time : 4.50 Hour | TAA Compliant : Yes | Plug/Connector Type : NEMA 5-15P | Load Capacity : 1500 VA/1350 W | Emergency Power OFF : Yes | Waveform Type : Pure Sine Wave | Product Name : SMART1500RM2UN UPS System with Pre-installed SNMPWEBCARD | Hot Swappable : Yes | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 1012 | Network Management Cards : WEBCARDLXE | Package Includes : SMART1500RM2UN SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS;Pre-installed WEBCARDLX network interface;USB-B to USB-A cable;Micro-USB to USB-A configuration/console cable;DB9 cable;EPO cable;4-Post rack mounting hardware;Owner's manual | UPS Applications : Large Network; High-End Desktop/Small Network | Output Capacity (VA) : 1500 | Network Compatibility : 100 Mbps (Fast Ethernet) | Grounding Details : Back panel grounding lug | Product Certifications : CSA (Canada); NOM (Mexico); UL 1778 | Output Capacity (Watts) : 1350 | Product Compliance : FCC Part 15 Class B (USA)

Dimensions:

Cord Length : 10 ft | Depth : 13 in | Width : 18 in | Height : 4 in | UPS Input Cord Length (ft.) : 10 | Minimum Required Rack Depth (inches) : 16.45 | Primary UPS Depth (mm) : 342 | Primary UPS Height (mm) : 88 | Rack Height : 2U | Primary UPS Width (mm) : 439 | UPS Power Module Dimensions (hwd, in.) : 3.45 x 17.3 x 13.45