UPS System, 1.5 kVA, 8 Outlets, Rack, Out: 120V AC , In:120V AC - SMART1500RMXLN

Description:

UPS System, Line Interactive, Power Rating 1.5 kVA, Wattage 1.35 kW, Input Voltage 120V AC, Output Voltage 120V AC, Backup Time (Half/Full Load) 14 min/4.9 min, Mounting Rack, Outlet Type UPS/Surge, Number of Outlets 8, Medical Grade No, NEMA Receptacle Configuration 5-15R, NEMA Plug Configuration 5-15P, Automatic Volts Regulation Yes, Fax/Modem Line Protection No, Transfer Time 1 to 4 msec, Width 17 in, Depth 19 in, Height 3 in, Cord Length 10 ft, Display Type LCD, 60 Hz Hz, Input Current 12 A

Details:

Item : UPS System | UPS Type : Line Interactive | Power Rating : 1.5 kVA | Mounting : Rack | Wattage : 1.35 kW | Input Voltage : 120V AC | Output Voltage : 120V AC | Backup Time (Half/Full Load) : 14 min/4.9 min | Outlet Type : UPS/Surge | Medical Grade : No | Number of Outlets : 8 | Includes : 4-Post Rack Mount Installation Kit, PowerAlert Software with USB, Serial and EPO Cables | Standards : UL | NEMA Receptacle Configuration : 5-15R | Ports : DB9 Serial, EPO, USB | Input Current : 12 A | Hz : 60 Hz | Special Features : Extended Run | Transfer Time : 1 to 4 msec | Phase : 1 | Automatic Volts Regulation : Yes | Fax/Modem Line Protection : No | NEMA Plug Configuration : 5-15p | Display Type : LCD | Green Environmental Attribute : Product Contributes To Reducing Energy Consumption | Green Certification or Other Recognition : UL1778CSANOMFCC Part 15 Category B (EMI), RoHS | Capacity - Batteries : 1500 VA/1350 W | Input Connection : NEMA 5-15P Plug | Front Panel LCD Display : Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) | Network Monitoring Port Description : Includes Pre-installed WEBCARDLX Network Management Card interface | Primary Form Factor : Rackmount | AC Mode Efficiency Rating (100% Load) : 0.95 | LED Indicators : Network Link/Activity (Green): Flashes for network activity. Network Speed (Yellow): 10 Mbps (Flashing), 100 Mbps (On steady). LX Platform Interface Status: Normal Operation (Solid Green); Software Update (Alternating Green/Orange ~1/sec); Factory Reset (Alternating Green/Orange ~2/sec). | Grounding Lug : Back panel grounding lug | Overvoltage Correction : Input voltages between 127 and 145 are reduced by 12% | UPS AC Suppression Joule Rating : 570 | DC System Voltage (VDC) : 36 | Expandable Battery Runtime : Extended runtime supported via optional external battery packs | Installation Form Factors Supported with Optional Accessories : 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM ) | AC Mode BTU / Hr. (Full Load) : 237 | Severe Undervoltage Correction : Input voltages between 83 and 94 are boosted by 24% | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145 | Audible Noise : 45 dBA maximum, front side 1m | Audible Alarm : Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions | Output kVA Capacity (kVA) : 1.5 | Individually Controllable Load Banks : Yes | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | Output AC Waveform (AC Mode) : Sine wave | Output Watt Capacity (Watts) : 1350 | Frequency Compatibility : 60 Hz | Communications Interface : DB9 Serial; EPO (emergency power off); Micro-USB; Pre-installed network card; RJ45 Network; Slot for SNMP/Web interface; USB (HID enabled); USB-A; USB-B | Nominal Voltage Details : 120v nominal output in battery mode | Output Volt Amp Capacity (VA) : 1500 | High Voltage Transfer to Battery Power (Setpoint) : 145 | PowerAlert Software : For local monitoring via the UPSâ„¢s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | Included Mounting Accessory Description : Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm) | Nominal Output Voltage(s) Supported : 110V; 115V; 120V | External Battery Pack Compatibility : BP36V15-2U (limit 1); BP36V42-3U (multi-pack compatible); BP36V27 -2US (multi-pack compatible) | Load Management Receptacles : Two switchable two-outlet 5-15R load banks | UPS Certifications : Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI) | Relative Humidity : 0 to 95%, non-condensing | Expandable Runtime : Yes | Network UPS Tools Compatibility : NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite | Output kW Capacity (kW) : 1.35 | Output Voltage Regulation (Line Mode) : -14%, +6% | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | UPS Input Connection Type : 5-15P | UPS Housing Material : Steel | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Communications Cable : Micro-USB, USB and DB9 cabling included | SNMP Compatibility : SNMP V1, V2c, V3 | Power Factor : 0.9 | Switches : 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions. LX Platform Interface: Recessed reset switch for interface reboot and factory reset | Input Circuit Breakers : 15A | UPS AC Suppression Response Time : Instantaneous | Output Voltage Regulation (Battery Mode) : +/- 5% | Input Phase : Single-Phase | Rated input current (Maximum Load) : 12A | Cooling Method : Fan | Output Receptacles : (8) 5-15R | EMI / RFI AC Noise Suppression : Yes | Nominal Input Voltage(s) Supported : 120V AC | Battery Recharge Rate (Included Batteries) : Less than 4.5 hours from 10% to 90% (typical, full load discharge) | Low Voltage Transfer to Battery Power (Setpoint) : 83 | Battery Replacement Description : Hot-swappable, user replaceable batteries | Recommended Electrical Service : 15A 120V | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Output AC Waveform (Battery Mode) : Pure Sine wave | Battery Access : Front panel battery access door | High Availability UPS Features : Hot swappable batteries | Alarm Cancel Operation : Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available | Installation Form Factors Supported with Included Accessories : 4 post 19 inch rackmount | EPO Port : RJ11 interface jack with 4-meter cable included. Supports normally open and normally closed EPO systems | Internal UPS Replacement Battery Cartridge : RBC93-2U | Output Capacity Details : Output is reduced to 1200 watts maximum when used with external battery packs | Undervoltage Correction : Input voltages between 95 and 108 are boosted by 12% | Battery Mode BTU / Hr. (Full Load) : 751 | Emergency Power OFF : Yes | Receptacle Detail : 8 x NEMA 5-15R | Software Included : PowerAlert Software | Product Line : SmartPro | Hot Swappable : Yes | Plug/Connector Type : NEMA 5-15P | Typical Battery Recharge Time : 4.50 Hour | Product Name : SmartPro SMART1500RMXLN 1.5kVA Rack-mountable UPS | USB : Yes | Certifications & Standards : UL1778, CSA, NOM, FCC Part 15 Category B (EMI) | Serial Port : Yes | Form Factor : Rack-mountable | Package Contents : SmartPro SMART1500RMXLN 1.5kVA Rack-mountable UPS, PowerAlert Software CD, USB Cable, Serial Cable, EPO Cable, 4 Post Installation Kit, Owner's Manual, Network Interface Card | Load Capacity : 1500 VA/1350 W | Network Management : SNMP Manageable

Dimensions:

Depth : 19 in | Cord Length : 10 ft | Width : 17 in | Height : 3 in | UPS Power Module Dimensions (hwd, in.) : 3.45 x 17.3 x 13.45 | Primary UPS Width (mm) : 439 | Minimum Required Rack Depth without External Battery Pack (in.) : 16.45 | UPS Input Cord Length (ft.) : 10 | Primary UPS Depth (mm) : 342 | Minimum Required Rack Depth with External Battery Pack (in.) : 19.95 | Primary UPS Height (mm) : 88 | Rack Height : 2U