UPS System, 1 kVA, 4 Outlets, Tower/Wall, Out: 115/120V AC , In:120V AC - SMART1200XLHG

Description:

UPS System, Line Interactive, Power Rating 1 kVA, Wattage 750 W, Input Voltage 120V AC, Output Voltage 115V AC, 120V AC, Backup Time (Half/Full Load) 27.5 min/11 min, Mounting Tower/Wall, Outlet Type UPS/Surge, Number of Outlets 4, Medical Grade Yes, NEMA Receptacle Configuration 5-15R, NEMA Plug Configuration 5-15P, Automatic Volts Regulation Yes, Fax/Modem Line Protection No, Transfer Time 2 to 4 msec, Width 8 in, Depth 9 in, Height 13 in, Cord Length 6 ft, Display Type LED, 60 Hz Hz

Details:

Item : UPS System | UPS Type : Line Interactive | Power Rating : 1 kVA | Mounting : Tower/Wall | Wattage : 750 W | Input Voltage : 120V AC | Output Voltage : 115/120V AC | Backup Time (Half/Full Load) : 27.5 min/11 min | Outlet Type : UPS/Surge | Medical Grade : Yes | Number of Outlets : 4 | Special Features : Advanced AVR Corrects Brownouts and Overvoltages, Pure Sine Wave Output, Extended Runtime w/BP36V15-2U, BP36V42-3U | Display Type : LED | Hz : 60 Hz | Green Environmental Attribute : Product Contributes To Reducing Energy Consumption | Ports : DB9 Serial, USB | Input Current : 9.2 A | Footnotes : 1,3,4,12,14 | NEMA Plug Configuration : 5-15p | Standards : CSA, FCC Part 15 Category A (EMI), UL 1778, UL60601-1 (Medical Grade) | Includes : PowerAlert Software and Cables | Automatic Volts Regulation : Yes | Phase : 1 | NEMA Receptacle Configuration : 5-15R | Fax/Modem Line Protection : No | Transfer Time : 2 to 4 msec | Green Certification or Other Recognition : UL1778 (USA, Series AGSM1200PSR3HG), UL2601-1 (Medical), cUL (Canada), FCC Class A (emissions), Conforms to IEEE 587 / ANSI C62.41 specifications | Capacity - Batteries : 1000 VA/750 W | Operating Temp. Range : 104°F (40°C) | Battery Type : Sealed Lead Acid (SLA) | Input Connection : 6 ft Cord with NEMA 5-15P-HG Plug | Internal UPS Replacement Battery Cartridge : RBC36SLT | Severe Undervoltage Correction : Input voltages between 81 and 95 are boosted by 21% | Output Volt Amp Capacity (VA) : 1000 | Relative Humidity : 0 to 95%, non-condensing | Installation Form Factors Supported with Optional Accessories : Wallmount (UPSWM - tower mounting kit) | Expandable Runtime : Yes | Battery Mode BTU / Hr. (Full Load) : 315.2 | Leakage Current : Less than 100 microamps | EMI / RFI AC Noise Suppression : Yes | Battery Access : Battery access door | Power Factor : 0.8 | Grounding Lug : Grounding lug (equipotential) | Input Circuit Breakers : 15A | Input Phase : Single-Phase | Nominal Output Voltage(s) Supported : 115V; 120V | Output AC Waveform (Battery Mode) : PWM sine wave | High Availability UPS Features : Hot swappable batteries | Output Watt Capacity (Watts) : 750 | Output Voltage Regulation (Line Mode) : -18%, +8% | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | Overvoltage Correction : Input voltages between 126 and 143 are reduced by 9% | AC Suppression Joule Rating : 940 | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 81 to 143 | Expandable Battery Runtime : Extended runtime supported via optional external battery packs | UPS Input Connection Type : 5-15P-HG | Output Receptacles : (4) 5-15R | Rated input current (Maximum Load) : 9.2A | Low Voltage Transfer to Battery Power (Setpoint) : 81 | DC System Voltage (VDC) : 36 | Battery Recharge Rate (Included Batteries) : Less than 4.5 hours from 10% to 90% | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Output kVA Capacity (kVA) : 1 | Recommended Electrical Service : 15A 120V | Nominal Input Voltage(s) Supported : 120V AC | PowerAlert Software : For local monitoring via the UPSâ„¢s built-in communication ports , download PowerAlert Local software at http://www.tripplite.com/poweralert | Output Receptacle Details : Hospital grade output receptacles | Communications Interface : USB; DB9 Serial | Frequency Compatibility : 60 Hz | Individually Controllable Load Banks : No | UPS Certifications : Tested to UL1778 (USA); Tested to CSA (Canada); Meets FCC Part 15 Category A (EMI); Tested to UL60601-1 (medical grade) | Cooling Method : Fan | Output AC Waveform (AC Mode) : Sine wave | High Voltage Transfer to Battery Power (Setpoint) : 143 | Output Voltage Regulation (Battery Mode) : 115V (+/- 5%) | Alarm Cancel Operation : Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status | UPS Housing Material : PVC | Primary Form Factor : Tower | UPS AC Suppression Response Time : Instantaneous | External Battery Pack Compatibility : BP36V15-2U (limit 1); BP36V27-2US (multi-pack compatible); BP36V42-3U (multi-pack compatible) | AC Mode BTU / Hr. (Full Load) : 162.8 | Switches : 2 Switches control off/on power status and alarm-cancel/self-test operation | UPS AC Suppression Joule Rating : 940 | Undervoltage Correction : Input voltages between 96 and 106 are boosted by 10% | Output Isolation Transformer : Hospital grade load isolation transformer | Battery Replacement Description : Hot-swappable, user replaceable batteries | Communications Cable : USB and DB9 serial cabling included | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | LED Indicators : 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status | Audible Alarm : Factory-muted audible alarm indicates power-failure, overload and low-battery conditions | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | AC Mode Efficiency Rating (100% Load) : 0.94 | Product Line : SmartPro | Package Contents : SmartPro 1200XLHG UPS, SMART 1200XLHG Medical Grade Tower UPS System, PowerAlert Software and cabling, Warranty information, Instruction manual | Product Name : SmartPro 1200XLHG UPS | Hot Swappable : Yes | Maximum Operating Temperature : 104°F (40°C) | Receptacle Detail : 4 x NEMA 5-15R | Additional Information : Ideal UPS protection for applications in medical patient-care areas where UL 2601-1 listed medical electrical equipment is required, Maintains less than 300 microamps leakage current for UPS and all connected equipment, Built-in isolation transformer with faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes, Provides connected equipment with continuous power during short and long duration loss of commercial power, Expandable runtime is available with the addition of one or more external battery packs (part# BP36V27), Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power, Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections, Full line isolation prevents shock potential and operational problems in sensitive electronic equipment, Resistant to electrostatic discharge, Supports loads up to 1000VA / 750 watts, 34 minutes half load runtime (500VA/375 watts), 16 minutes full load runtime (1000VA/750 watts), 4 protected hospital-grade outlets; 6-ft. cord, 1-RS-232 and 1-USB serial port for network interface; SNMP compatible, SNMP compatible with separate purchase SNMPWEBSOLO ethernet adapter accessory, Complete surge protection, line isolation and EMI/RFI noise filtering, 2 year product warranty, PowerAlert unattended shutdown software and complete cabling included, 5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace, Battery replacement door, Back panel grounding lug | Network Management : SNMP Manageable | Plug/Connector Type : NEMA 5-15P | Load Capacity : 1000 VA/750 W | Certifications & Standards : UL1778 (USA, Series AGSM1200PSR3HG), UL2601-1 (Medical), cUL (Canada), FCC Class A (emissions), Conforms to IEEE 587 / ANSI C62.41 specifications | Status Indicators : Includes 5 front-panel indicator LEDs to show battery charge level, AC line voltage levels, automatic voltage regulation status, UPS load level and replace battery warning | Alarm : On Battery, Low Battery, Overload | Form Factor : Tower | Battery Chemistry : Lead Acid | Battery Life : 6 Year | Typical Battery Recharge Time : 4 Hour | USB : Yes | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 315.2 | UPS Applications : Hospital/Medical | Output Capacity (Watts) : 750 | Product Compliance : FCC Part 15 Class A (USA) | Product Certifications : CSA (Canada); UL 1778; UL 60601-1 | Installation Form Factors Supported with Included Accessories : Tower | Grounding Details : Grounding lug (equipotential) | Package Includes : SMART1200XLHG 1kVA/750W Medical-Grade Tower UPS System;USB monitoring cable, 6 ft.;DB9 serial monitoring cable, 6 ft.;PowerAlert Software;Owner's Manual | Output Capacity (VA) : 1000

Dimensions:

Height : 13 in | Depth : 9 in | Cord Length : 6 ft | Width : 8 in | UPS Input Cord Length (ft.) : 6 | Primary UPS Depth (mm) : 241 | Input Cord Length (ft.) : 6 | Primary UPS Height (mm) : 318 | UPS Power Module Dimensions (hwd, in.) : 12.5 x 7.5 x 9.5 | Primary UPS Width (mm) : 191