UPS System, 1 kVA, 6 Outlets, Rack, Out: 120V AC , In:120V AC - SMART1000RM2U - G6199952

Description:

UPS System, Line Interactive, Power Rating 1 kVA, Wattage 800 W, Input Voltage 120V AC, Output Voltage 120V AC, Backup Time (Half/Full Load) 15 min/5.3 min, Mounting Rack, Outlet Type UPS/Surge, Number of Outlets 6, Medical Grade No, NEMA Receptacle Configuration 5-15R, NEMA Plug Configuration 5-15P, Automatic Volts Regulation Yes, Fax/Modem Line Protection No, Transfer Time 2 to 4 msec, Width 17 in, Depth 13 in, Height 3 in, Cord Length 10 ft, Display Type LCD, 60 Hz Hz, Input Current 9.2 A

Details:

Item : UPS System | UPS Type : Line Interactive | Power Rating : 1 kVA | Mounting : Rack | Wattage : 800 W | Input Voltage : 120V AC | Output Voltage : 120V AC | Backup Time (Half/Full Load) : 15 min/5.3 min | Outlet Type : UPS/Surge | Medical Grade : No | Number of Outlets : 6 | Automatic Volts Regulation : Yes | Ports : EPO, RS232, Slot for SNMPWEBCARD, USB | Hz : 60 Hz | NEMA Plug Configuration : 5-15p | Green Environmental Attribute : Product Contributes To Reducing Energy Consumption | Footnotes : Slot for SNMPWEBCARD | Includes : PowerAlert Software, Serial and EPO Cables and 4-Post Rackmount Installation Kit, USB | NEMA Receptacle Configuration : 5-15R | Display Type : LCD | Transfer Time : 2 to 4 msec | Input Current : 9.2 A | Special Features : Hot Swappable Batteries | Standards : UL 1778 | Phase : 1 | Fax/Modem Line Protection : No | Input Connection : NEMA 5-15P Plug | Battery Type : Valve Regulated Lead Acid (VRLA) | Nominal Output Voltage(s) Supported : 110V; 115V; 120V | Audible Noise : 45 dBA maximum, front side 1m | Output AC Waveform (Battery Mode) : Pure Sine wave | Grounding Lug : Back panel grounding lug | Rated input current (Maximum Load) : 9.2A | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Installation Form Factors Supported with Optional Accessories : 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM ) | AC Mode BTU / Hr. (Full Load) : 134 | Load Management Receptacles : Two switchable two-outlet 5-15R load banks | Network Management Cards : SNMPWEBCARD ; TLNETCARD ; WEBCARDLX | Frequency Compatibility : 60 Hz | Battery Recharge Rate (Included Batteries) : Less than 4 hours from 10% to 90% (typical, full load discharge) | Expandable Runtime : No | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | Output Watt Capacity (Watts) : 800 | Power Factor : 0.8 | Low Voltage Transfer to Battery Power (Setpoint) : 83 | Output Voltage Regulation (Line Mode) : -21%, +8% | Individually Controllable Load Banks : Yes | High Voltage Transfer to Battery Power (Setpoint) : 147 | Output AC Waveform (AC Mode) : Sine wave | Output Voltage Regulation (Battery Mode) : +/- 5% | Included Mounting Accessory Description : Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm) | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Alarm Cancel Operation : Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available | Battery Mode BTU / Hr. (Full Load) : 600 | Switches : 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions | Overvoltage Correction : Input voltages between 128 and 147 are reduced by 12% | Output kVA Capacity (kVA) : 1 | Relative Humidity : 0 to 95%, non-condensing | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | Input Phase : Single-Phase | Communications Interface : USB; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface | Internal UPS Replacement Battery Cartridge : Current version uses RBC24V-LCD ; Prior versions used RBC92-2U ; Check the label inside the battery door to verify the appropriate replacement battery part number | Output Volt Amp Capacity (VA) : 1000 | Recommended Electrical Service : 15A 120V | UPS AC Suppression Joule Rating : 570 | Nominal Voltage Details : 120v nominal output in battery mode | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147 | Audible Alarm : Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions | EMI / RFI AC Noise Suppression : Yes | Output Receptacles : (6) 5-15R | UPS Certifications : Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI) | UPS Input Connection Type : 5-15P | High Availability UPS Features : Hot swappable batteries | UPS Housing Material : Steel | Installation Form Factors Supported with Included Accessories : 4 post 19 inch rackmount | Input Circuit Breakers : 15A | Primary Form Factor : Rackmount | Network UPS Tools Compatibility : NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Cooling Method : Fan | Front Panel LCD Display : Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) | Undervoltage Correction : Input voltages between 83 and 107 are boosted by 14% | Battery Access : Front panel battery access door | PowerAlert Software : For local monitoring via the UPS™s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | Battery Replacement Description : Hot-swappable, user replaceable batteries | AC Mode Efficiency Rating (100% Load) : 0.95 | Communications Cable : USB and DB9 cabling included | Nominal Input Voltage(s) Supported : 120V AC | DC System Voltage (VDC) : 24 | UPS AC Suppression Response Time : Instantaneous | Waveform Type : Sine Wave | Network Management : SNMP Manageable | Receptacle Detail : 6 x NEMA 5-15R | Typical Battery Recharge Time : 4 Hour | Plug/Connector Type : NEMA 5-15P | Total Number of Expansion Slots : 1 | Load Capacity : 1000 VA/800 W | Battery Chemistry : Lead Acid | Software Included : PowerAlert Software | Certifications & Standards : UL1778 (USA), cUL (Canada), FCC Class B (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications | Product Name : SMART1000RM2U UPS System | USB : Yes | Emergency Power OFF : Yes | Hot Swappable : Yes | Alarm : Low Battery, Overload, On Battery | Product Line : SmartPro | Maximum Operating Temperature : 104°F (40°C) | Package Contents : SMART1000RM2U UPS System, PowerAlert Software CD, Serial & EPO Cabling, 4 x Post Rackmount Installation Kit, Instruction Manual | UPS Applications : Large Network; High-End Desktop/Small Network; Retail/Point of Sale; Hospitality | Output Capacity (Watts) : 800 | Product Certifications : CSA (Canada); NOM (Mexico); UL 1778 | Package Includes : SMART1000RM2U SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS;USB cable;DB9 cable;EPO cable;Mounting hardware;Owner's manual | Grounding Details : Back panel grounding lug | Output Capacity (VA) : 1000 | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 600 | Product Compliance : FCC Part 15 Class B (USA)

Dimensions:

Depth : 13 in | Height : 3 in | Cord Length : 10 ft | Width : 17 in | UPS Power Module Dimensions (hwd, in.) : 3.45 x 17.35 x 12.5 | Minimum Required Rack Depth (inches) : 15.5 | Rack Height : 2U | Primary UPS Depth (mm) : 318 | UPS Input Cord Length (ft.) : 10 | Primary UPS Width (mm) : 441 | Primary UPS Height (mm) : 88