UPS System, 1 kVA, 6 Outlets, Rack, Out: 220/230/240V AC , In:230V AC - SMX1000RT2U

Description:

UPS System, Line Interactive, Power Rating 1 kVA, Wattage 900 W, Input Voltage 230V AC, Output Voltage 220V AC, 230V AC, 240V AC, Backup Time (Half/Full Load) 21 min/9 min, Mounting Rack, Outlet Type UPS/Surge, Number of Outlets 6, Medical Grade No, NEMA Receptacle Configuration C13, NEMA Plug Configuration C14, Automatic Volts Regulation Yes, Fax/Modem Line Protection No, Transfer Time 2 to 4 msec, Width 18 in, Depth 14 in, Height 4 in, Cord Length No Cord, Display Type LCD, 50/60 Hz Hz

Details:

Item : UPS System | UPS Type : Line Interactive | Power Rating : 1 kVA | Mounting : Rack | Wattage : 900 W | Input Voltage : 230V AC | Output Voltage : 220/230/240V AC | Backup Time (Half/Full Load) : 21 min/9 min | Outlet Type : UPS/Surge | Medical Grade : No | Number of Outlets : 6 | Standards : UL | Automatic Volts Regulation : Yes | NEMA Plug Configuration : C14 | Fax/Modem Line Protection : No | Ports : DB9 Serial, EPO, USB | Input Current : 3.4 A | Phase : 1 | Display Type : LCD | Special Features : Hot Swappable Batteries | Transfer Time : 2 to 4 msec | Includes : 4-Post Rackmount Installation Kit, and (2) C13 to C14 Power Cables, PowerAlert Software with USB, Serial & EPO Cables | Hz : 50/60 Hz | NEMA Receptacle Configuration : C13 | Green Certification or Other Recognition : CEUL1778EN62040GOSTSASOIRAM | Capacity - Batteries : 1000 VA/900 W | Output Voltage Regulation (Line Mode) : +6%, -11% | Battery Recharge Rate (Included Batteries) : Less than 4.5 hours from 10% to 90% (typical, full load discharge) | Installation Form Factors Supported with Optional Accessories : 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM ) | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | Expandable Runtime : No | UPS Housing Material : Steel | Output kVA Capacity (kVA) : 1 | Included Mounting Accessory Description : Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm) | Network Management Cards : SNMPWEBCARD ; TLNETCARD ; WEBCARDLX | Input Phase : Single-Phase | Nominal Voltage Details : 230V nominal output in battery mode | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Grounding Lug : Back panel grounding lug | Audible Noise : 45 dBA maximum, front side 1m | Load Management Receptacles : Two switchable two-outlet C13 load banks | UPS Input Connection Type : C14 inlet | Output AC Waveform (AC Mode) : Sine wave | Output Volt Amp Capacity (VA) : 1000 | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | High Voltage Transfer to Battery Power (Setpoint) : 278 | Individually Controllable Load Banks : Yes | UPS AC Suppression Response Time : Instantaneous | Audible Alarm : Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions | UPS Input Connection Description : IEC320-C14 input connection accepts a variety of user supplied detachable C13 output cordsets to match country or site-specific power sources | UPS AC Suppression Joule Rating : 350 | Power Factor : 0.9 | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | AC Mode Efficiency Rating (100% Load) : 0.97 | Output Voltage Regulation (Battery Mode) : +/- 5% | EMI / RFI AC Noise Suppression : Yes | Included Output Power Cables : Includes 2 C13 to C14 output power cables | DC System Voltage (VDC) : 24 | Alarm Cancel Operation : Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available | Overvoltage Correction : Input voltages between 244 and 278 are reduced by 12% | Battery Access : Front panel battery access door | Relative Humidity : 0 to 95%, non-condensing | Output Watt Capacity (Watts) : 900 | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 182 to 278 | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Cooling Method : Fan | Input Circuit Breakers : 10A | Rated input current (Maximum Load) : 4.8A | Front Panel LCD Display : Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) | Communications Interface : DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB (HID enabled) | High Availability UPS Features : Hot swappable batteries | Nominal Input Voltage(s) Supported : 230V AC | PowerAlert Software : For local monitoring via the UPSâ„¢s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | Frequency Compatibility : 50 / 60 Hz | AC Mode BTU / Hr. (Full Load) : 100 | Hot-Swap PDU options : PDUBHV10 (2U / 8 C13 outlets) | Output Receptacles : (6) C13 | Primary Form Factor : Rackmount | LED Indicators : 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status | Nominal Output Voltage(s) Supported : 220V; 230V; 240V | Switches : 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions | Internal UPS Replacement Battery Cartridge : IMPORTANT BATTERY REPLACEMENT INFORMATION > If your SMX1000RT2U UPS is equipped with a LCD front-panel screen, order Tripp Lite RBC24V-LCD (quantity 1) replacement battery; If your SMX1000RT2U UPS is equipped with LED front-panel indicators, order Tripp Lite RBC92-2U (quantity 1) replacement battery | Undervoltage Correction : Input voltages between 182 and 206 are boosted by 12% | Communications Cable : USB and DB9 cabling included | UPS Certifications : CE; Tested to GOST (Russia) | Battery Mode BTU / Hr. (Full Load) : 918 | Battery Replacement Description : Hot-swappable, user replaceable batteries | UPS Certification Details : IEC 62040-1, IEC 62040-2 Class A EMI | Installation Form Factors Supported with Included Accessories : 4 post 19 inch rackmount | Low Voltage Transfer to Battery Power (Setpoint) : 182 | Frequency Compatibility Details : Automatic frequency selection | Output AC Waveform (Battery Mode) : Pure Sine wave | Hot Swappable : Yes | Form Factor : Rack/Tower | Serial Port : Yes | USB : Yes | Additional Information : Replacement Battery Cartridge quantity: 2, Cooling method: Fan, Compatible with Tripp Lite's Watchdog system service, Cold Start Capable | Network Management : SNMP Manageable | Software Included : PowerAlert monitoring software | Receptacle Detail : 6 x IEC 60320 C13 | Certifications & Standards : CE, UL1778, EN62040, GOST, SASO, IRAM | Package Contents : SmartPro SMX1000RT2U Rackmountable/Tower UPS, UPS System with 4 post rackmount hardware, Two 1.8m IEC320-C13 to C14 load jumper cables, Cabling for USB & DB9 monitoring and EPO switching, PowerAlert unattended shutdown and UPS/Power monitoring software, Warranty information | Product Name : SmartPro SMX1000RT2U Rackmountable/Tower UPS | Typical Battery Recharge Time : 4 Hour | Emergency Power OFF : Yes | Load Capacity : 1000 VA/900 W | Product Line : SmartPro | Plug/Connector Type : IEC 320-C14

Dimensions:

Width : 18 in | Depth : 14 in | Height : 4 in | Cord Length : No Cord | Minimum Required Rack Depth (inches) : 15.75 | Primary UPS Depth (mm) : 343 | UPS Power Module Dimensions (hwd, in.) : 3.5 x 17.5 x 13.5 | Primary UPS Width (mm) : 445 | Primary UPS Height (mm) : 89 | Rack Height : 2U