UPS System, 1 kVA, 6 Outlets, Tower, Out: 220/230/240V AC , In:230V AC - SMX1200XLHG - G9415113

Description:

UPS System, Line Interactive, Power Rating 1 kVA, Wattage 750 W, Input Voltage 230V AC, Output Voltage 220V AC, 230V AC, 240V AC, Backup Time (Half/Full Load) 27.5 min/11 min, Mounting Tower, Outlet Type UPS/Surge, Number of Outlets 6, Medical Grade Yes, NEMA Receptacle Configuration C13, NEMA Plug Configuration C14, Automatic Volts Regulation No, Fax/Modem Line Protection No, Transfer Time 2 to 4 msec, Width 8 in, Depth 9 in, Height 13 in, Cord Length No Cord, Display Type LED, 50/60 Hz Hz

Details:

Item : UPS System | UPS Type : Line Interactive | Power Rating : 1 kVA | Mounting : Tower | Wattage : 750 W | Input Voltage : 230V AC | Output Voltage : 220/230/240V AC | Backup Time (Half/Full Load) : 27.5 min/11 min | Outlet Type : UPS/Surge | Medical Grade : Yes | Number of Outlets : 6 | Automatic Volts Regulation : No | Standards : UL | Phase : 1 | Input Current : 5 A | Transfer Time : 2 to 4 msec | Includes : PowerAlert Software and Cables | Display Type : LED | Fax/Modem Line Protection : No | NEMA Plug Configuration : C14 | NEMA Receptacle Configuration : C13 | Special Features : Built-In Audible Alarm | Ports : DB9 Serial, USB | Hz : 50/60 Hz | Battery Type : Valve Regulated Lead Acid (VRLA) | Grounding Lug : Ground Potential Equalization Connector: POAG-S6/20 | Installation Form Factors Supported with Optional Accessories : Wallmount (UPSWM - tower mounting kit) | Relative Humidity : 0 to 95%, non-condensing | Individually Controllable Load Banks : No | Output Voltage Regulation (Line Mode) : -18%, +8% | Output Receptacles : (6) C13 | DC System Voltage (VDC) : 36 | Voltage Regulation Description : Line interactive UPS offers 2 boost levels of brownout correction and a single level of overvoltage adjustment to maintain usable, computer grade output without consuming battery power over an input voltage range of 155 to 274V AC. | Undervoltage Correction : Input voltages between 183 and 199 are boosted by 10% | Internal UPS Replacement Battery Cartridge : RBC36SLT | UPS AC Suppression Joule Rating : 340 | Expandable Battery Runtime : Supports extended runtime with optional BP36V15-2U (limit 1) and BP36V42-3U external battery pack (multi-pack compatible) | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | UPS Housing Material : PVC | Battery Access : Battery access door allows hot swap battery replacement without powering connected equipment off | Output AC Waveform (Battery Mode) : PWM sine wave | Voltage Compatibility (VAC) : 230 | LED Indicators : 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status | Output Watt Capacity (Watts) : 750 | Primary Form Factor : Tower | Communications Interface : USB; DB9 Serial | Audible Alarm : Audible Alarm is factory muted for silent operation; Audible alarm can be restored to indicate power failure, overload conditions and Low Battery events using our Free Power Alert UPS management software. | AC Mode BTU / Hr. (Full Load) : 252.2 | EMI / RFI AC Noise Suppression : Yes | Nominal Output Voltage(s) Supported : 220V; 230V; 240V | Battery Mode BTU / Hr. (Full Load) : 252.2 | Expandable Runtime : Yes | Cooling Method : UPS cooling via rear-exit fan | Severe Undervoltage Correction : Input voltages between 156 and 182 are boosted by 21% | Low Voltage Transfer to Battery Power (Setpoint) : 155 | UPS Certifications : CE; Tested to UL60601-1 (medical grade) | Nominal Input Voltage(s) Supported : 230V AC | High Voltage Transfer to Battery Power (Setpoint) : 274 | Battery Recharge Rate (Included Batteries) : Less than 4.5 hours from 10% to 90% | AC Suppression Response Time : Instantaneous | Frequency Compatibility : 50 / 60 Hz | UPS Input Connection Type : C14 inlet | Input Phase : Single-Phase | Overvoltage Correction : Input voltages between 245 and 274V AC are reduced by 9% | Output Volt Amp Capacity (VA) : 1000 | Frequency Compatibility Details : Automatic frequency selection | External Battery Pack Compatibility : BP36V15-2U (limit 1); BP36V42-3U (multi-pack compatible); BP36V27-2US (multi-pack compatible) | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Switches : Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions | Recommended Electrical Service : 10A 230V | Rated input current (Maximum Load) : 5A | Nominal Voltage Details : 230v nominal inverter output voltage | Certifications & Standards : CE IEC 60601-1 (Medical) Class B (Emissions) | Load Capacity : 1000 VA/750 W | Product Name : SmartPro SMX1200XLHG 1000 VA Tower UPS | Form Factor : Tower | Typical Battery Recharge Time : 4.50 Hour | Hot Swappable : Yes | Package Contents : SmartPro SMX1200XLHG 1000 VA Tower UPS, PowerAlert Software CD, 1 x DB-9 Serial Cable, 1 x USB Cable, Instruction Manual with Warranty Information | Software Included : PowerAlert Software | Product Line : SmartPro | Serial Port : Yes | USB : Yes | Receptacle Detail : 6 x IEC 60320 C13 | Plug/Connector Type : IEC 60320 C14 | Product Compliance : CE (Europe) | Package Includes : SMX1200XLHG 1kVA/750W Medical-Grade Tower UPS System;USB monitoring cable, 1.8 m (6 ft.);DB9 serial monitoring cable, 1.8 m (6 ft.);PowerAlert software;Owner's Manual | Grounding Details : Ground Potential Equalization Connector: POAG-S6/20 | Typical Battery Lifespan : 3-6 years, depending on usage | Output Capacity (VA) : 1000 | Installation Form Factors Supported with Included Accessories : Tower | High Availability UPS Features : Surge/noise protection | Output Capacity (Watts) : 750 | Product Certifications : UL 60601-1 | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 252.2 | UPS Applications : Hospital/Medical

Dimensions:

Cord Length : No Cord | Depth : 9 in | Height : 13 in | Width : 8 in | Primary UPS Depth (mm) : 231 | UPS Input Cord Length (ft.) : 0.5 | Primary UPS Width (mm) : 191 | UPS Power Module Dimensions (hwd, in.) : 12.7 x 7.5 x 9.1 | Primary UPS Height (mm) : 323