TRIPP LITE UPS System, 1 kVA, 8 Outlets, Rack, Out: 120V AC , In:120V AC - SMART1000RMXL2U

Description:

UPS System, Line Interactive, Power Rating 1 kVA, Wattage 900 W, Input Voltage 120V AC, Output Voltage 120V AC, Backup Time (Half/Full Load) 18 min/6.3 min, Mounting Rack, Outlet Type UPS/Surge, Number of Outlets 8, Medical Grade No, NEMA Receptacle Configuration 5-15R, NEMA Plug Configuration 5-15P, Automatic Volts Regulation Yes, Fax/Modem Line Protection No, Transfer Time 3 to 4 msec, Width 18 in, Depth 14 in, Height 4 in, Cord Length 10 ft, Display Type LCD, 60 Hz Hz, Input Current 9.2 A

Details:

Item : UPS System | UPS Type : Line Interactive | Power Rating : 1 kVA | Mounting : Rack | Wattage : 900 W | Input Voltage : 120V AC | Output Voltage : 120V AC | Backup Time (Half/Full Load) : 18 min/6.3 min | Outlet Type : UPS/Surge | Medical Grade : No | Number of Outlets : 8 | Fax/Modem Line Protection : No | Standards : UL | Special Features : Hot Swappable Batteries | Green Environmental Attribute : Product Contributes To Reducing Energy Consumption | NEMA Receptacle Configuration : 5-15R | Input Current : 9.2 A | NEMA Plug Configuration : 5-15p | Display Type : LCD | Automatic Volts Regulation : Yes | Phase : 1 | Transfer Time : 3 to 4 msec | Includes : PowerAlert Software, Serial and EPO Cables and 4-Post Rackmount Installation Kit, USB | Hz : 60 Hz | Ports : EPO, RS232, USB | Green Certification or Other Recognition : UL1778 (USA)FCC Part 15 Category A (EMI), RoHS | Capacity - Batteries : 1000 VA/900 W | Input Connection : NEMA 5-15P Plug | Battery Type : Valve Regulated Lead Acid (VRLA) | Battery Mode BTU / Hr. (Full Load) : 542 | Output Receptacles : (8) 5-15R | Relative Humidity : 0 to 95%, non-condensing | Input Phase : Single-Phase | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | Internal UPS Replacement Battery Cartridge : RBC93-2U | Output Voltage Regulation (Battery Mode) : +/-5% | Undervoltage Correction : Input voltages between 104 and 83 are boosted by 14% | Output AC Waveform (AC Mode) : Pure Sine wave | UPS Housing Material : Steel | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | Network Management Cards : SNMPWEBCARD ; TLNETCARD ; WEBCARDLX | Power Factor : 0.9 | Installation Form Factors Supported with Included Accessories : 4 post 19 inch rackmount | EMI / RFI AC Noise Suppression : Yes | Nominal Input Voltage(s) Supported : 120V AC | UPS Certifications : Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI) | Network UPS Tools Compatibility : NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite | Individually Controllable Load Banks : Yes | PowerAlert Software : For local monitoring via the UPSâ„¢s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | DC System Voltage (VDC) : 36 | Audible Noise : 45 dBA maximum, front side 1m | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147 | Battery Replacement Description : Hot-swappable, replaceable batteries | Expandable Runtime : Yes | Expandable Battery Runtime : Extended runtime supported via optional external battery packs | Communications Cable : USB, DB9 and EPO cabling included | Overvoltage Correction : Input voltages between 127 and 147 are reduced by 12% | Alarm Cancel Operation : Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available | Output kVA Capacity (kVA) : 1 | Nominal Voltage Details : 120v nominal output in battery mode | AC Mode Efficiency Rating (100% Load) : 0.97 | Nominal Output Voltage(s) Supported : 110V; 115V; 120V | Primary Form Factor : Rackmount | UPS AC Suppression Joule Rating : 570 | Communications Interface : USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface | Output Capacity Details : Output is reduced to 800 watts maximum when used with external battery packs | Cooling Method : Fan | Low Voltage Transfer to Battery Power (Setpoint) : 83 | High Availability UPS Features : Hot swappable batteries | Battery Recharge Rate (Included Batteries) : Less than 4.5 hours from 10 to 90% (typical, full load discharge) | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Switches : 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions | Output Voltage Regulation (Line Mode) : 120V (+6%, -14%) | Frequency Compatibility : 60 Hz | Installation Form Factors Supported with Optional Accessories : 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM ) | Front Panel LCD Display : Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, frequency, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) | Recommended Electrical Service : 15A 120V | Rated input current (Maximum Load) : 9.2A | Included Mounting Accessory Description : Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm) | Load Management Receptacles : Two switchable two outlet 5-15R load banks | UPS Input Connection Type : 5-15P | Battery Access : Front panel battery access door | AC Suppression Response Time : Instantaneous | Output Watt Capacity (Watts) : 900 | Output Volt Amp Capacity (VA) : 1000 | External Battery Pack Compatibility : BP36V15-2U (limit 1); BP36V42-3U (multi-pack compatible); BP36V27 -2US (multi-pack compatible) | AC Mode BTU / Hr. (Full Load) : 179 | High Voltage Transfer to Battery Power (Setpoint) : 147 | Audible Alarm : Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions | Output AC Waveform (Battery Mode) : Pure Sine wave | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Receptacle Detail : 8 x NEMA 5-15R | Serial Port : Yes | Network Management : SNMP Manageable | Product Series : SmartPro | Hot Swappable : Yes | Form Factor : Rack/Tower | Software Included : PowerAlert Software | Plug/Connector Type : NEMA 5-15P | Package Contents : SMART1000RMXL2U UPS System, PowerAlert Software CD, Serial Cable, USB Cable, EPO Cable, 4 x Post Rackmount Installation Kit, Instruction Manual | Product Name : SMART1000RMXL2U UPS System | Load Capacity : 1000 VA/900 W | USB : Yes | Certifications & Standards : UL1778 (USA), FCC Part 15 Category A (EMI) | Emergency Power OFF : Yes | Typical Battery Recharge Time : 4.50 Hour | Nominal Input Voltage Description : 80V-151V; adjustable to 70-153V | Storage Elevation (ft.) : 0-32,808 | Emergency Power Off (EPO)/Remote On-Off (ROO) : Yes | Voltage Compatibility (VAC) : User-Selectable | Product Compliance : FCC Part 15 Class B (USA) | Grounding Details : Rear panel grounding lug | Operating Elevation (ft.) : 0-10,000 | Package Includes : 1000VA 1000W 120V Line-Interactive UPS;USB cable;DB9 cable;Rack-mounting hardware;Tower support stands;Safety instructions;Advanced User Guide | Product Certifications : CSA (Canada); IEC 62040-2; NOM (Mexico); UL 1778 | Output Capacity (VA) : 1000 | UPS Applications : Large Network; High-End Desktop/Small Network | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 465 | Output Capacity (Watts) : 1000

Dimensions:

Width : 18 in | Height : 4 in | Cord Length : 10 ft | Depth : 14 in | Minimum Required Rack Depth with External Battery Pack (in.) : 19.95 | Primary UPS Depth (mm) : 342 | Primary UPS Width (mm) : 439 | Minimum Required Rack Depth without External Battery Pack (in.) : 16.45 | UPS Power Module Dimensions (hwd, in.) : 3.45 x 17.3 x 13.45 | UPS Input Cord Length (ft.) : 10 | Rack Height : 2U | Primary UPS Height (mm) : 88 | Unit Dimensions (hwd / in.) : 3.400 x 17.200 x 17.600 | Minimum Required Rack Depth (inches) : 21