TRIPP LITE UPS System, 2.2 kVA, 4 Outlets, Desktop/Tower, Out: 120V AC , In:120V AC - SMART2200RM2U

Description:

UPS System, Line Interactive, Power Rating 2.2 kVA, Wattage 1.92 kW, Input Voltage 120V AC, Output Voltage 120V AC, Backup Time (Half/Full Load) 12 min/4.5 min, Mounting Desktop/Tower, Outlet Type UPS/Surge, Number of Outlets 4, Medical Grade No, NEMA Receptacle Configuration 5-15R, NEMA Plug Configuration 5-15P, Automatic Volts Regulation Yes, Fax/Modem Line Protection No, Transfer Time 5 msec, Width 17 in, Depth 20 in, Height 3 in, Cord Length 10 ft, Display Type LCD, 60 Hz Hz

Details:

Item : UPS System | UPS Type : Line Interactive | Power Rating : 2.2 kVA | Mounting : Desktop/Tower | Wattage : 1.92 kW | Input Voltage : 120V AC | Output Voltage : 120V AC | Backup Time (Half/Full Load) : 12 min/4.5 min | Outlet Type : UPS/Surge | Medical Grade : No | Number of Outlets : 4 | Input Current : 16 A | Phase : 1 | Footnotes : 4,8 | Transfer Time : 5 msec | Automatic Volts Regulation : Yes | Display Type : LCD | Includes : 4-Post Rack Mount Installation Kit, PowerAlert Software with USB, Serial and EPO Cables | NEMA Plug Configuration : 5-15p | Special Features : Cold Start Operation Supported, Hot Swappable Batteries | NEMA Receptacle Configuration : 5-15R | Fax/Modem Line Protection : No | Green Environmental Attribute : Product Contributes To Reducing Energy Consumption | Standards : UL 1778 | Ports : EPO, RS232, USB | Hz : 60 Hz | Green Certification or Other Recognition : UL1778 (USA)CSA (Canada)NOM (Mexico)FCC Part 15 Category A (EMI), RoHS | Capacity - Batteries : 2200 VA/1920 W | Operating Temp. Range : 104°F (40°C) | Input Connection : NEMA 5-15P Plug | Battery Type : Valve Regulated Lead Acid (VRLA) | Input Circuit Breakers : 20A | Battery Recharge Rate (Included Batteries) : Less than 4.5 hours from 10% to 90% (typical, full load discharge) | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | Communications Cable : USB, DB9 and EPO cabling included | Output AC Waveform (Battery Mode) : Pure Sine wave | Battery Replacement Description : Hot-swappable, user replaceable batteries | Rated input current (Maximum Load) : 16A (120V) | Primary Form Factor : Rackmount | High Voltage Transfer to Battery Power (Setpoint) : 145 | Nominal Output Voltage(s) Supported : 110V; 115V; 120V | PowerAlert Software : For local monitoring via the UPSâ„¢s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | Power Factor : 0.87 | Installation Form Factors Supported with Included Accessories : 4 post 19 inch rackmount | Nominal Voltage Details : 120v nominal output in battery mode | Battery Mode BTU / Hr. (Full Load) : 1157 | Audible Noise : 45 dBA maximum, front side 1m | AC Mode Efficiency Rating (100% Load) : 0.96 | Network UPS Tools Compatibility : NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | Network Management Cards : SNMPWEBCARD ; TLNETCARD ; WEBCARDLX ; RELAYIOCARD | Individually Controllable Load Banks : Yes | Output kW Capacity (kW) : 1.92 | Frequency Compatibility : 60 Hz | Switches : 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions | Input Phase : Single-Phase | UPS Certification Details : SAFETY STANDARD (U.S.) - UL1778:2014 (5th Ed) R10.17; SAFETY STANDARD (CANADA) - CAN/CSA-C22.2 No. 107.3-14 (3rd Ed) + GI1 / FCC/ICES COMPLIANT - CLASS A | Overvoltage Correction : Input voltages between 127 and 145 are reduced by 12% | Grounding Lug : Back panel grounding lug | Recommended Electrical Service : 20A 120V | Included Mounting Accessory Description : Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm) | Output Watt Capacity (Watts) : 1920 | Output Receptacles : (4) 5-15R; (4) 5-15/20R | AC Mode BTU / Hr. (Full Load) : 306 | UPS Input Connection Type : 5-20P | Audible Alarm : Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions | Battery Access : Front panel battery access door | Alarm Cancel Operation : Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available | DC System Voltage (VDC) : 48 | Severe Undervoltage Correction : Input voltages between 83 and 95 are boosted by 24% | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145 | High Availability UPS Features : Hot swappable batteries | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | EMI / RFI AC Noise Suppression : Yes | Output Voltage Regulation (Line Mode) : -14%, +6% | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | UPS AC Suppression Joule Rating : 570 | Undervoltage Correction : Input voltages between 108 and 96 are boosted by 12% | Installation Form Factors Supported with Optional Accessories : 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM ) | Expandable Runtime : No | Low Voltage Transfer to Battery Power (Setpoint) : 83 | Output Volt Amp Capacity (VA) : 2200 | Output kVA Capacity (kVA) : 2.2 | UPS AC Suppression Response Time : Instantaneous | Internal UPS Replacement Battery Cartridge : RBC94-2U | Communications Interface : USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface | Load Management Receptacles : Two switchable single-outlet load banks | Front Panel LCD Display : Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) | UPS Certifications : Meets FCC Part 15 Category A (EMI); Tested to CSA (Canada); Tested to NOM (Mexico); Tested to UL1778 (USA) | Nominal Input Voltage(s) Supported : 120V AC | Output AC Waveform (AC Mode) : Pure Sine wave | Cooling Method : Fan | UPS Housing Material : Steel | Output Voltage Regulation (Battery Mode) : +/- 5% | Relative Humidity : 0 to 95%, non-condensing | Load Capacity : 2200 VA/1920 W | Product Name : SMART2200RM2U UPS System | Product Line : SmartPro | Receptacle Detail : 4 x NEMA 5-15/20R, 4 x NEMA 5-15R | Protection Type : Under Voltage, Over Voltage | Alarm : Low Battery, On Battery, Overload | Maximum Operating Temperature : 104°F (40°C) | Software Included : PowerAlert Software | Emergency Power OFF : Yes | Network Management : SNMP Manageable | Plug/Connector Type : NEMA 5-20P | USB : Yes | Waveform Type : Sine Wave | Serial Port : Yes | Status Indicators : 5 Front Panel Leds: Green Power Led, Green Voltage Correction Led, 3 Color Battery Charge Led, 3 Color Output Load Led, Red Battery Warning Led | TAA Compliant : Yes | Hot Swappable : Yes | Certifications & Standards : UL1778 (USA), CSA (Canada), NOM (Mexico), FCC Part 15 Category A (EMI) | Typical Battery Recharge Time : 4.50 Hour | Form Factor : Rack-mountable | Package Contents : SMART2200RM2U UPS System, PowerAlert Software CD, USB Cable, Serial Cable, EPO Cable, Owner's Manual with Warranty Information | Output Capacity (Watts) : 1950 | LED Indicators : 3 status-indicating LEDs (normal, battery mode, alarm); LED light bar (blue = nominal, blinking blue = warning, red = alarm) | Output Capacity (VA) : 1950 | Emergency Power Off (EPO)/Remote On-Off (ROO) : Yes | UPS Applications : High-End Desktop/Small Network; Large Network | Grounding Details : Rear panel grounding lug | Operating Elevation (ft.) : 0-10,000 | Package Includes : 1950VA 1950W 120V Line-Interactive UPS;USB cable;DB9 cable;Rack-mounting hardware;Tower support stands;Safety instructions | Product Compliance : ENERGY STAR Qualified; FCC Part 15 Class A (USA) | Nominal Input Voltage Description : 80V-151V; adjustable to 70-153V | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 591 | Product Certifications : CSA (Canada); UL 1778 | Storage Elevation (ft.) : 0-32,808

Dimensions:

Height : 3 in | Width : 17 in | Cord Length : 10 ft | Depth : 20 in | Minimum Required Rack Depth (inches) : 24.46 | Rack Height : 2U | Primary UPS Height (mm) : 87 | UPS Power Module Dimensions (hwd, in.) : 3.43 x 17.32 x 19.46 | Primary UPS Width (mm) : 440 | Primary UPS Depth (mm) : 494 | UPS Input Cord Length (ft.) : 10 | Unit Dimensions (hwd / in.) : 3.400 x 17.000 x 23.700