UPS System, 2.2 kVA, 8 Outlets, Rack, Out: 120V AC , In:120V AC - SMART2200RM2UN

Description:

UPS System, Line Interactive, Power Rating 2.2 kVA, Wattage 1.92 kW, Input Voltage 120V AC, Output Voltage 120V AC, Backup Time (Half/Full Load) 12 min/4.5 min, Mounting Rack, Outlet Type UPS/Surge, Number of Outlets 8, Medical Grade No, NEMA Receptacle Configuration 5-15/20R, 5-15R, NEMA Plug Configuration 5-20P, Automatic Volts Regulation Yes, Fax/Modem Line Protection No, Transfer Time 1 to 5 msec, Width 18 in, Depth 20 in, Height 4 in, Cord Length 10 ft, Display Type LCD, 60 Hz Hz

Details:

Item : UPS System | UPS Type : Line Interactive | Power Rating : 2.2 kVA | Mounting : Rack | Wattage : 1.92 kW | Input Voltage : 120V AC | Output Voltage : 120V AC | Backup Time (Half/Full Load) : 12 min/4.5 min | Outlet Type : UPS/Surge | Medical Grade : No | Number of Outlets : 8 | Ports : DB9 Serial, EPO, USB | Display Type : LCD | Phase : 1 | Includes : 4-Post Rack Mount Installation Kit, PowerAlert Software with USB, Serial and EPO Cables | Automatic Volts Regulation : Yes | Transfer Time : 1 to 5 msec | NEMA Receptacle Configuration : 5-15/20R, 5-15R | Standards : UL | Special Features : Hot Swappable Batteries | Fax/Modem Line Protection : No | Hz : 60 Hz | NEMA Plug Configuration : 5-20P | Input Current : 16 A | Green Certification or Other Recognition : UL1778CSANOMFCC Part 15 Category A (EMI) | Capacity - Batteries : 2200 VA/1920 W | Input Connection : NEMA 5-20P Plug | Relative Humidity : 0 to 95%, non-condensing | Installation Form Factors Supported with Optional Accessories : 2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM ) | Communications Interface : DB9 Serial; EPO (emergency power off); Micro-USB; Pre-installed network card; RJ45 Network; Slot for SNMP/Web interface; USB (HID enabled); USB-A; USB-B | Undervoltage Correction : Input voltages between 108 and 96 are boosted by 12% | Frequency Compatibility : 60 Hz | Network Monitoring Port Description : Pre-installed WEBCARDLX Network Management Card interface | Severe Undervoltage Correction : Input voltages between 83 and 95 are boosted by 24% | UPS AC Suppression Joule Rating : 570 | High Availability UPS Features : Hot swappable batteries | Nominal Voltage Details : 120v nominal output in battery mode | Output Volt Amp Capacity (VA) : 2200 | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Switches : 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions. LX Platform Interface: Recessed reset switch for interface reboot and factory reset | Audible Alarm : Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions | Audible Noise : 45 dBA maximum, front side 1m | Output AC Waveform (AC Mode) : Pure Sine wave | UPS Input Connection Type : 5-20P | AC Mode Efficiency Rating (100% Load) : 0.96 | Output Watt Capacity (Watts) : 1920 | Battery Access : Front panel battery access door | Internal UPS Replacement Battery Cartridge : RBC94-2U | Nominal Input Voltage(s) Supported : 120V AC | Nominal Output Voltage(s) Supported : 110V; 115V; 120V | Rated input current (Maximum Load) : 16A (120V) | Expandable Runtime : No | Communications Cable : Micro-USB, USB and DB9 cabling included | Front Panel LCD Display : Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) | EPO Port : RJ11 interface jack with 4-meter cable included. Supports normally open and normally closed EPO systems | Recommended Electrical Service : 20A 120V | LED Indicators : Network Link/Activity (Green): Flashes for network activity. Network Speed (Yellow): 10 Mbps (Flashing), 100 Mbps (On steady). LX Platform Interface Status: Normal Operation (Solid Green); Software Update (Alternating Green/Orange ~1/sec); Factory Reset (Alternating Green/Orange ~2/sec). | Power Factor : 0.87 | Cooling Method : Fan | Output Voltage Regulation (Line Mode) : -14%, +6% | Grounding Lug : Back panel grounding lug | Included Mounting Accessory Description : Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm) | Input Circuit Breakers : 20A | UPS Certification Details : SAFETY STANDARD (U.S.) - UL1778:2014 (5th Ed) R10.17; SAFETY STANDARD (CANADA) - CAN/CSA-C22.2 No. 107.3-14 (3rd Ed) + GI1 / FCC/ICES COMPLIANT - CLASS A | SNMP Compatibility : SNMP V1, V2c, V3 | DC System Voltage (VDC) : 48 | Load Management Receptacles : Two switchable single-outlet load banks | PowerAlert Software : For local monitoring via the UPSâ„¢s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | UPS Certifications : Meets FCC Part 15 Category A (EMI); Tested to CSA (Canada); Tested to NOM (Mexico); Tested to UL1778 (USA) | Output AC Waveform (Battery Mode) : Pure Sine wave | Battery Replacement Description : Hot-swappable, user replaceable batteries | Overvoltage Correction : Input voltages between 127 and 145 are reduced by 12% | Individually Controllable Load Banks : Yes | Network UPS Tools Compatibility : NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite | Input Phase : Single-Phase | EMI / RFI AC Noise Suppression : Yes | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145 | Low Voltage Transfer to Battery Power (Setpoint) : 83 | UPS AC Suppression Response Time : Instantaneous | Installation Form Factors Supported with Included Accessories : 4 post 19 inch rackmount | Alarm Cancel Operation : Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available | Output Voltage Regulation (Battery Mode) : +/- 5% | Primary Form Factor : Rackmount | Battery Mode BTU / Hr. (Full Load) : 1157 | AC Mode BTU / Hr. (Full Load) : 306 | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | UPS Housing Material : Steel | Battery Recharge Rate (Included Batteries) : Less than 4.5 hours from 10% to 90% (typical, full load discharge) | High Voltage Transfer to Battery Power (Setpoint) : 145 | Output kW Capacity (kW) : 1.92 | Output Receptacles : (4) 5-15R; (4) 5-15/20R | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Output kVA Capacity (kVA) : 2.2 | Serial Port : Yes | Emergency Power OFF : Yes | Software Included : PowerAlert Software | Form Factor : Rack-mountable | Hot Swappable : Yes | Typical Battery Recharge Time : 4.50 Hour | Load Capacity : 2200 VA/1920 W | Certifications & Standards : UL1778, CSA, NOM, FCC Part 15 Category A (EMI) | Receptacle Detail : 4 x NEMA 5-15/20R, 4 x NEMA 5-15R | Product Line : SmartPro | USB : Yes | Network Management : SNMP Manageable | Package Contents : SmartPro SMART2200RM2UN 2.2kVA Rack-mountable UPS, PowerAlert Software CD, USB Cable, Serial Cable, EPO Cable, 4 Post Rackmount Installation kit, Instruction Manual, Network Interface Card | Product Name : SmartPro SMART2200RM2UN 2200VA Rack-mountable UPS | Plug/Connector Type : NEMA 5-20P

Dimensions:

Width : 18 in | Height : 4 in | Cord Length : 10 ft | Depth : 20 in | Minimum Required Rack Depth (inches) : 24.46 | UPS Input Cord Length (ft.) : 10 | Primary UPS Depth (mm) : 494 | Primary UPS Width (mm) : 440 | UPS Power Module Dimensions (hwd, in.) : 3.43 x 17.32 x 19.46 | Rack Height : 2U | Primary UPS Height (mm) : 87