UPS System, 2.2 kVA, 8 Outlets, Rack/Tower, Out: 120V AC , In:120/230V AC - SM2200RMDVTAA

Description:

UPS System, Line Interactive, Power Rating 2.2 kVA, Wattage 1.92 kW, Input Voltage 120V AC, 230V AC, Output Voltage 120V AC, Backup Time (Half/Full Load) 30 min/12 min, Mounting Rack/Tower, Outlet Type UPS/Surge, Number of Outlets 8, Medical Grade No, NEMA Receptacle Configuration 5-15R, 5-20R, NEMA Plug Configuration 5-20P/C20, Automatic Volts Regulation Yes, Fax/Modem Line Protection No, Transfer Time 2 to 4 msec, Width 18 in, Depth 25 in, Height 5 in, Cord Length 6 ft, Display Type LED

Details:

Item : UPS System | UPS Type : Line Interactive | Power Rating : 2.2 kVA | Mounting : Rack/Tower | Wattage : 1.92 kW | Input Voltage : 120/230V AC | Output Voltage : 120V AC | Backup Time (Half/Full Load) : 30 min/12 min | Outlet Type : UPS/Surge | Medical Grade : No | Number of Outlets : 8 | Hz : 50/60 Hz | Special Features : Cold Start, Greater Than 95% Efficiency, Hot Swappable, Individually Controllable Load Banks | Footnotes : 3,4,8 | Ports : DB9 Serial, EPO, SNMP/Web Slot, USB (HID Enabled) | NEMA Plug Configuration : 5-20P/C20 | Fax/Modem Line Protection : No | Includes : (5) International Input Power Cables, 2-9USTAND Tower Stand Kit, 2POSTRMKITHD 2-Post Rack Mount kit, 4POSTRAILKIT, DB9, EPO Cables and PowerAlert Software, USB | Green Environmental Attribute : Product Contributes To Reducing Energy Consumption | Input Current : 16 A | Standards : CSA, FCC Part 15 Category A (EMI), NOM, ROHS (Restriction of Hazardous Substances), TAA Compliant, UL 1778 | Automatic Volts Regulation : Yes | Display Type : LED | Transfer Time : 2 to 4 msec | Phase : 1 | NEMA Receptacle Configuration : 5-15R, 5-20R | Green Certification or Other Recognition : UL1778FCC Part 15 Category ATAA Compliant, RoHS | Capacity - Batteries : 2200 VA/1920 W | Input Connection : 6 ft Cord with NEMA 5-20P Plug, C20 Inlet | Battery Type : Valve Regulated Lead Acid (VRLA) | EMI / RFI AC Noise Suppression : Yes | Output kVA Capacity (kVA) : 2.2 | Switches : 2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches support nominal voltage selection | Battery Access : Front panel battery access door | Primary Form Factor : Rackmount | Battery Recharge Rate (Included Batteries) : Less than 4.5 hours from 10% to 90% (internal batteries) | PowerAlert Software : For local monitoring via the UPSâ„¢s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | AC Mode Efficiency Rating (100% Load) : 0.95 | Low Voltage Transfer to Battery Power (Setpoint) : 89 (120V), 170 (230V) | Network UPS Tools Compatibility : NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite | Battery Replacement Description : Hot-swappable, user replaceable batteries | UPS Input Connection Description : C20 inlet and 5 compatible plugsets (5-20P, Schuko CEE7, EU1-16P, British BS1363, Italian CEI 23-16) | DC System Voltage (VDC) : 48 | Output AC Waveform (Battery Mode) : Pure Sine wave | Internal UPS Replacement Battery Cartridge : RBC49-DV (quantity 2 required) | UPS AC Suppression Joule Rating : 340 | Output AC Waveform (AC Mode) : Sine wave | Frequency Compatibility : 50 / 60 Hz | High Voltage Transfer to Battery Power (Setpoint) : 148 (120V), 286 (230V) | Nominal Output Voltage(s) Supported : 120V | Input Phase : Single-Phase | External Battery Pack Compatibility : BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V27-2US (multi-pack compatible) | Power Factor : 0.87 | Undervoltage Correction : Voltage boost of 12% applies when input voltage is between 96 and 108 (120V) | Audible Noise : 45 dBA maximum, front side 1m | Communications Cable : USB and DB9 cabling included | High Availability UPS Features : Hot swappable batteries | AC Mode BTU / Hr. (Full Load) : 347 | Individually Controllable Load Banks : Yes | Output Watt Capacity (Watts) : 1920 | Output kW Capacity (kW) : 1.92 | LED Indicators : 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status | Relative Humidity : 0 to 95%, non-condensing | Frequency Compatibility Details : Automatic frequency selection | Output Volt Amp Capacity (VA) : 2200 | Nominal Input Voltage(s) Supported : 120V AC; 230V AC | Output Voltage Regulation (Battery Mode) : +/- 5% | Installation Form Factors Supported with Optional Accessories : 4 post rackmount full-depth ( 4POSTRAILKIT ) | Input Circuit Breakers : 20A | UPS Housing Material : Steel | Output Receptacles : (4) 5-15R; (4) 5-15/20R | Alarm Cancel Operation : Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status | Audible Alarm : Audible alarm indicates power-failure, overload and low-battery conditions | UPS Certifications : Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI); TAA Compliant | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius. | Included Mounting Accessory Description : Complete installation accessories available for 2 post, 4 post and tower installation | Rated input current (Maximum Load) : 16A (120V), 10A (230V) | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius. | UPS Input Connection Type : 5-20P; C20 inlet | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | Overvoltage Correction : Voltage reduction of 12% applies when input is between 127 and 148 (120V) | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains 120v line power output with input range of 89 to 148 or 170 to 286 | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | Expandable Runtime : Yes | Cooling Method : Fan | Load Management Receptacles : Two switchable single-outlet 5-15R load banks | Installation Form Factors Supported with Included Accessories : Tower | Battery Mode BTU / Hr. (Full Load) : 894 | UPS AC Suppression Response Time : Instantaneous | Network Management Cards : SNMPWEBCARD ; WEBCARDLX | Expandable Battery Runtime : Extended runtime supported via optional external battery packs | Communications Interface : USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface | Typical Battery Recharge Time : 4.50 Hour | Product Name : SmartPro SM2200RMDVTAA 2200 VA Tower/Rack Mountable UPS | TAA Compliant : Yes | USB : Yes | Receptacle Detail : 4 x NEMA 5-15R, 4 x NEMA 5-15/20R | Additional Information : Input Receptacle: C20 | Emergency Power OFF : Yes | Form Factor : Rack/Tower | Product Line : SmartPro | Software Included : PowerAlert Software | Hot Swappable : Yes | Load Capacity : 2200 VA/1920 W | Package Contents : SmartPro SM2200RMDVTAA 2200 VA Tower/Rack Mountable UPS, 5 x International Input Power Cables, USB Cable, Serial Cable, EPO Cable, PowerAlert Software CD, Tower Stand Kit, 4 Post 19 inch Rackmount Mounting Kit, 2 Post 19 inch Rackmount Mounting Kit, User Manual | Serial Port : Yes | Network Management : SNMP Manageable | Certifications & Standards : UL1778, FCC Part 15 Category A, TAA Compliant | Product Compliance : FCC Part 15 Class A (USA); Trade Agreements Act (TAA) | Output Capacity (Watts) : 1920 | UPS Applications : Large Network | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 894 | Package Includes : SM2200RMDVTAA UPS system;5 international input power cables;USB, DB9, EPO cabling;2-9USTAND tower stand kit;2POSTRMKITHD two-post rackmount kit;4POSTRAILKIT;Owner's manual | Product Certifications : CSA (Canada); NOM (Mexico); UL 1778 | Output Capacity (VA) : 2200

Dimensions:

Cord Length : 6 ft | Width : 18 in | Depth : 25 in | Height : 5 in | Primary UPS Width (mm) : 445 | Primary UPS Depth (mm) : 641 | Minimum Required Rack Depth without External Battery Pack (in.) : 30.25 | Primary UPS Height (mm) : 133 | UPS Power Module Dimensions (hwd, in.) : 5.25 x 17.5 x 25.25 | UPS Input Cord Length (ft.) : 6 | Minimum Required Rack Depth with External Battery Pack (in.) : 32.25 | Rack Height : 3U | Minimum Required Rack Depth (inches) : 29