UPS System, 3 kVA, 9 Outlets, Rack, Out: 120V AC , In:120V AC - SMART3000CRMXL

Description:

UPS System, Line Interactive, Power Rating 3 kVA, Wattage 2.88 kW, Input Voltage 120V AC, Output Voltage 120V AC, Backup Time (Half/Full Load) 19 min/7.5 min, Mounting Rack, Outlet Type UPS/Surge, Number of Outlets 9, Medical Grade No, NEMA Receptacle Configuration 5-15/20R, L5-30R, NEMA Plug Configuration L5-30P, Automatic Volts Regulation Yes, Fax/Modem Line Protection No, Transfer Time 5 msec, Width 17 in, Depth 18 in, Height 7 in, Cord Length 10 ft, Display Type LED, 60 Hz Hz

Details:

Item : UPS System | UPS Type : Line Interactive | Power Rating : 3 kVA | Mounting : Rack | Wattage : 2.88 kW | Input Voltage : 120V AC | Output Voltage : 120V AC | Backup Time (Half/Full Load) : 19 min/7.5 min | Outlet Type : UPS/Surge | Medical Grade : No | Number of Outlets : 9 | Standards : UL 1778 | Green Environmental Attribute : Product Contributes To Reducing Energy Consumption | Input Current : 24 A | Hz : 60 Hz | Special Features : Cold Start Operation Supported, Hot Swappable Batteries | Automatic Volts Regulation : Yes | Ports : EPO, RS232, Slot for SNMPWEBCARD, USB | Transfer Time : 5 msec | Phase : 1 | Footnotes : Slot for SNMPWEBCARD | Display Type : LED | NEMA Receptacle Configuration : 5-15/20R, L5-30R | Fax/Modem Line Protection : No | Includes : Serial Cables and 2-Post Rackmount Installation Kit, USB Cables | NEMA Plug Configuration : L5-30P | Green Certification or Other Recognition : UL1778 (USA), CSA (Canada), NOM (Mexico), Class A (Emissions) | Capacity - Batteries : 3000 VA/2880 W | Input Connection : NEMA 5-15P Plug | Battery Type : Valve Regulated Lead Acid (VRLA) | Output Volt Amp Capacity (VA) : 3000 | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Primary Form Factor : Rackmount | DC System Voltage (VDC) : 48 | UPS AC Suppression Joule Rating : 570 | Audible Noise : 45 dBA maximum, front side 1m | AC Suppression Response Time : Instantaneous | Power Factor : 0.96 | Recommended Electrical Service : 120V 30A | Frequency Compatibility : 60 Hz | Output Voltage Regulation (Battery Mode) : +/-5% | Included Mounting Accessory Description : Included 2POSTRMKITWM mounting accessory enables 2-post rackmount installation | Audible Alarm : 3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short beeps) and low battery (continuous tone) | Voltage Regulation Description : Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without using battery power, during brownouts to 83V and overvoltages to 145V | Severe Undervoltage Correction : Input voltages between 83 and 95 are boosted by 24% | WatchDog Compatibility : Yes, compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of application / OS or hard power off/on reboot of connected equipment ideal for unattended kiosk applications | Output Capacity Details : Maximum output increases to 3600W when used with hardwire input | Cooling Method : Fan | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Overvoltage Correction : Input voltages between 127 and 145V AC are reduced by 12% | PowerAlert Software : For local monitoring via the UPS™s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | Input Phase : Single-Phase | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | AC Mode BTU / Hr. (Full Load) : 539 | Switches : Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions. Back panel includes battery charge level switch for internal or external battery configurations | Output Voltage Regulation (Line Mode) : -18%, +8% | Output Circuit Breakers : 20A (x2) - each 20A breaker protects 4 5-15/20R outlets / 30A breaker protects L5-30R | Battery Access : Battery access door allows hot swap battery replacement without powering connected equipment off | Nominal Output Voltage(s) Supported : 110V; 115V; 120V | Output kVA Capacity (kVA) : 3 | Battery Mode BTU / Hr. (Full Load) : 2159 | LED Indicators : 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status | Low Voltage Transfer to Battery Power (Setpoint) : 83 | Relative Humidity : 0-95%, non-condensing | Rated input current (Maximum Load) : 24A (L5-30P input), 30A (hardwire) | Installation Form Factors Supported with Included Accessories : 2 post 19 inch rackmount | Load Management Receptacles : Three switchable single-outlet 5-15/20R load banks | UPS Input Connection Type : L5-30P; Hardwire | High Availability UPS Features : Hot swappable batteries | Output kW Capacity (kW) : 2.88 | SNMP Compatibility : Compatible with Tripp Lite UPS management card options WEBCARDLX , SNMPWEBCARD and RELAYIOCARD | EPO Port : Includes RJ11 EPO (emergency power off) port and interconnection cable | Network Management Cards : SNMPWEBCARD ; WEBCARDLX ; RELAYIOCARD | Output Watt Capacity (Watts) : 2880 | EMI / RFI AC Noise Suppression : Yes | UPS Housing Material : Steel | Installation Form Factors Supported with Optional Accessories : 4 post rackmount full-depth ( 4POSTRAILKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ) | Output Receptacles : (8) 5-15/20R; (1) L5-30R | Voltage Compatibility (VAC) : 120 | High Voltage Transfer to Battery Power (Setpoint) : 145 | Communications Interface : USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface | Nominal Voltage Details : 120v nominal output in battery mode | Output AC Waveform (Battery Mode) : Pure Sine wave | Nominal Input Voltage(s) Supported : 120V AC | Internal UPS Replacement Battery Cartridge : RBC94-2U (quantity 2) | External Battery Pack Compatibility : BP48V24-2U (limit 1); BP48V48RT4U (multi-pack compatible); BP48V27-2US (multi-pack compatible) | UPS Certifications : Tested to CSA (Canada); Tested to NOM (Mexico); Tested to UL1778 (USA) | Undervoltage Correction : Input voltages between 96 and 108 are boosted by 12% | Expandable Battery Runtime : Extended runtime supported via optional external battery packs | Expandable Runtime : Yes | Battery Recharge Rate (Included Batteries) : Less than 7.2 hours from 10% to 90% (typical, full load discharge) | Individually Controllable Load Banks : Yes | Package Contents : SmartPro Compact 4U Rackmount UPS System, 2 x Post Rackmount Installation Brackets, USB and Serial Cabling, Owner's Manual Information | Emergency Power OFF : Yes | Additional Information : Output VA: 3600VA hardwired connection, Output watts: 3600 watts hardwired connection, Full load runtime: With hardwired line cord - 5 minutes (3600 watts), Half load runtime: With hardwired line cord - 13 minutes (1800 watts), Includes RJ11 EPO (emergency power off) port and interconnection cable | Software Included : PowerAlert Software | Load Capacity : 3000 VA/2880 W | USB : Yes | Network Management : SNMP Manageable | Certifications & Standards : UL1778 (USA), CSA (Canada), NOM (Mexico), Class A (Emissions) | Product Name : SmartPro Compact 4U Rackmount UPS System | UPS Applications : Large Network | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 2159 | Product Certifications : CSA (Canada); NOM (Mexico); UL 1778 | Package Includes : SmartPro Compact 4U Rackmount UPS system;2 post rackmount installation brackets;USB and Serial Cabling;Owner's manual information | Output Capacity (VA) : 3000 | Output Capacity (Watts) : 2880

Dimensions:

Width : 17 in | Cord Length : 10 ft | Height : 7 in | Depth : 18 in | Minimum Required Rack Depth without External Battery Pack (in.) : 22.8 | Rack Height : 4U | Primary UPS Height (mm) : 175 | UPS Power Module Dimensions (hwd, in.) : 6.89 x 17.30 x 17.80 | Primary UPS Depth (mm) : 452 | Primary UPS Width (mm) : 439 | Minimum Required Rack Depth with External Battery Pack (in.) : 24.8 | UPS Input Cord Length (ft.) : 10 | Minimum Required Rack Depth (inches) : 21