UPS System, 5 kVA, 12 Outlets, Rack, Out: 220/230/240V AC , In:230V AC - SMX5000XLRT3U

Description:

UPS System, Line Interactive, Power Rating 5 kVA, Wattage 3.75 kW, Input Voltage 230V AC, Output Voltage 220V AC, 230V AC, 240V AC, Backup Time (Half/Full Load) 20 min/8.5 min, Mounting Rack, Outlet Type Hardwired, Number of Outlets 12, Medical Grade No, NEMA Receptacle Configuration No Configuration, Automatic Volts Regulation Yes, Fax/Modem Line Protection No, Transfer Time 2 to 4 msec, Width 18 in, Depth 25 in, Height 5 in, Cord Length No Cord, Display Type LED, 50/60 Hz Hz

Details:

Item : UPS System | UPS Type : Line Interactive | Power Rating : 5 kVA | Mounting : Rack | Wattage : 3.75 kW | Input Voltage : 230V AC | Output Voltage : 220/230/240V AC | Backup Time (Half/Full Load) : 20 min/8.5 min | Outlet Type : Hardwired | Medical Grade : No | Number of Outlets : 12 | Input Current : 27 A | Hz : 50/60 Hz | Standards : UL | NEMA Receptacle Configuration : No Configuration | Phase : 1 | Includes : (2) C13 to C14 Cables, 4-Post Rackmount Installation Kit, PowerAlert Software with USB, Serial and EPO Cables | Automatic Volts Regulation : Yes | Special Features : Extended Run | Display Type : LED | Fax/Modem Line Protection : No | Transfer Time : 2 to 4 msec | Ports : DB9 Serial, EPO, USB | Green Certification or Other Recognition : CE, GOST, SASO | Capacity - Batteries : 5000 VA/3750 W | Input Connection : Hardwired | Battery Type : Valve Regulated Lead Acid (VRLA) | Nominal Output Voltage(s) Supported : 220V; 230V; 240V | AC Mode Efficiency Rating (100% Load) : 0.98 | UPS Input Connection Description : Hardwire input supports International 230V input (L, N, PE) | Battery Recharge Rate (Included Batteries) : Less than 4 hours from 10% to 90% (typical, full load discharge) | Expandable Battery Runtime : Extended runtime supported via optional external battery packs | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | Frequency Compatibility Details : Automatic frequency selection | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | Primary Form Factor : Rackmount | Included Output Power Cables : Includes 3 C13 to C14 output power cables | Communications Cable : USB and DB9 cabling included | EMI / RFI AC Noise Suppression : Yes | Overvoltage Correction : Input voltages between 245 and 282 are reduced by 12% | Battery Access : Front panel battery access door | Output Watt Capacity (Watts) : 3750 | Output kW Capacity (kW) : 3.75 | Network Management Cards : SNMPWEBCARD ; TLNETCARD ; WEBCARDLX | Nominal Voltage Details : 230v nominal inverter output voltage | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Internal UPS Replacement Battery Cartridge : RBC94-3U (quantity 3) | Installation Form Factors Supported with Optional Accessories : 2 post rackmount ( 2POSTRMKITHD ); Tower ( 2-9USTAND ) | Cooling Method : Fans | Audible Alarm : Audible alarm indicates power-failure, overload and low-battery conditions | Output Volt Amp Capacity (VA) : 5000 | Output Voltage Regulation (Line Mode) : -17%, +8% | PowerAlert Software : For local monitoring via the UPSâ„¢s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert | Battery Replacement Description : Hot-swappable, user replaceable batteries | Communications Interface : USB; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface | High Availability UPS Features : Hot swappable batteries | Nominal Input Voltage(s) Supported : 230V AC | Battery Mode BTU / Hr. (Full Load) : 1267 | UPS AC Suppression Joule Rating : 480 | Frequency Compatibility : 50 / 60 Hz | Grounding Lug : Back panel grounding lug | WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications | Power Factor : 0.75 | UPS Certification Details : Class A (EMI) | Undervoltage Correction : Input voltages between 170 and 199 are boosted by 12% | Output Voltage Regulation (Battery Mode) : +/- 5% | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 170 to 282 | Low Voltage Transfer to Battery Power (Setpoint) : 170 | Output AC Waveform (AC Mode) : Sine wave | Input Phase : Single-Phase | Rated input current (Maximum Load) : 27A | Relative Humidity : 0 to 95%, non-condensing | Switches : 2 Switches control off/on power status and alarm-cancel/self-test operation | Output AC Waveform (Battery Mode) : Pure Sine wave | Audible Noise : 45 dBA maximum, front side 1m | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Individually Controllable Load Banks : No | External Battery Pack Compatibility : BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V27-2US (multi-pack compatible) | Installation Form Factors Supported with Included Accessories : 4 post 19 inch rackmount | Expandable Runtime : Yes | Output Receptacles : (8) C13; (3) C19 | LED Indicators : 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status | AC Mode BTU / Hr. (Full Load) : 271 | DC System Voltage (VDC) : 48 | UPS AC Suppression Response Time : Instantaneous | UPS Certifications : CE | Output kVA Capacity (kVA) : 5 | Output Circuit Breakers : 15A (x3) breaker supports 1 C19 outlet each, 10A (x2) breaker supports 4 C13 outlets each | Alarm Cancel Operation : Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status | High Voltage Transfer to Battery Power (Setpoint) : 282 | UPS Housing Material : Steel | UPS Input Connection Type : Hardwire | Receptacle Detail : 8 x IEC 60320 C13, 3 x IEC 60320 C19 | Form Factor : Rack/Tower | Serial Port : Yes | Additional Information : Switches: Yes, includes 2 front panel-mounted push button switches for system enable, self-test and alarm cancel functions, Low voltage transfer to battery power: 170VAC (resets to line power as voltage increases to 179VAC), High voltage transfer to battery power: 282V (resets to line power as voltage decreases to 274VAC), Cold Start: Yes, inverter can be cold started to enable temporary AC output during a power failure, TVSS grounding: Includes back panel grounding point with thubscrew for dataline surge suppressors and other network accessories requiring a safe grounding point | Plug/Connector Type : Hardwired | Network Management : SNMP Manageable | Hot Swappable : Yes | Emergency Power OFF : Yes | Package Contents : SMX5000XLRT3U UPS System, PowerAlert Software and Cabling, Mounting hardware for 4 post rackmount installation, Warranty information, Instruction manual | Load Capacity : 5000 VA/3750 W | Software Included : PowerAlert Software | Certifications & Standards : CE, GOST, SASO | USB : Yes | Product Name : SMX5000XLRT3U UPS System | Dataline Protection : RJ-11 | Typical Battery Recharge Time : 4 Hour | Product Line : SmartPro | UPS Applications : Large Network; High-End Desktop/Small Network | Output Capacity (VA) : 5000 | Product Compliance : CE (Europe) | Package Includes : SMX5000XLRT3U UPS system;USB, DB9 and EPO Cabling;Mounting hardware for 4 post rackmount installation;Warranty information;Instruction manual | Battery Mode Heat Dissipation (BTU/Hr) @ Full Load : 1267 | Output Capacity (Watts) : 3750 | Grounding Details : Back panel grounding lug

Dimensions:

Cord Length : No Cord | Height : 5 in | Depth : 25 in | Width : 18 in | Primary UPS Depth (mm) : 635 | Minimum Required Rack Depth with External Battery Pack (in.) : 32 | UPS Power Module Dimensions (hwd, in.) : 5.2 x 17.5 x 25 | Rack Height : 3U | Minimum Required Rack Depth without External Battery Pack (in.) : 28.5 | Primary UPS Height (mm) : 132 | Primary UPS Width (mm) : 445 | Minimum Required Rack Depth (inches) : 28