TRIPP LITE UPS System, 700 VA, 4 Outlets, Tower/Wall, Out: 115/120V AC , In:120V AC - SMART 700 HG

Description:

UPS System, Line Interactive, Power Rating 700 VA, Wattage 450 W, Input Voltage 120V AC, Output Voltage 115V AC, 120V AC, Backup Time (Half/Full Load) 42 min/18 min, Mounting Tower/Wall, Outlet Type UPS/Surge, Number of Outlets 4, Medical Grade Yes, NEMA Receptacle Configuration 5-15R, NEMA Plug Configuration 5-15P, Automatic Volts Regulation Yes, Fax/Modem Line Protection No, Transfer Time 2 to 4 msec, Width 8 in, Depth 9 in, Height 13 in, Cord Length 6 ft, Display Type LED, 60 Hz Hz

Details:

Item : UPS System | UPS Type : Line Interactive | Power Rating : 700 VA | Mounting : Tower/Wall | Wattage : 450 W | Input Voltage : 120V AC | Output Voltage : 115/120V AC | Backup Time (Half/Full Load) : 42 min/18 min | Outlet Type : UPS/Surge | Medical Grade : Yes | Number of Outlets : 4 | Footnotes : 3,4,14 | Green Environmental Attribute : Product Contributes To Reducing Energy Consumption | Fax/Modem Line Protection : No | Hz : 60 Hz | NEMA Plug Configuration : 5-15p | Includes : USB and DB9 Monitoring Cable | Ports : DB9 Serial, USB | NEMA Receptacle Configuration : 5-15R | Transfer Time : 2 to 4 msec | Automatic Volts Regulation : Yes | Phase : 1 | Display Type : LED | Input Current : 5.5 A | Special Features : AVR Corrects Brownouts and Overvoltages, Power Management Software, Pure Sine Wave Output | Standards : FCC Part 15 Category A (EMI); ROHS (Restriction of Hazardous Substances); CSA; UL1778; UL60601-1 (Medical Grade) | Green Certification or Other Recognition : UL1778 (USA, Series AGSM700PSR3HG), UL2601-1 (Medical), cUL (Canada), FCC Class A (emissions), Conforms to IEEE 587 / ANSI C62.41 specifications | Battery Type : Sealed Lead Acid (SLA) | Operating Temp. Range : 104°F (40°C) | Capacity - Batteries : 700 VA/450 W | Input Connection : 6 ft Cord with NEMA 5-15P-HG Plug | Severe Undervoltage Correction : Input voltages between 81 and 95 are boosted by 21% | Low Voltage Transfer to Battery Power (Setpoint) : 81 | Leakage Current : Equal to 100 microamps | Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions | Output Volt Amp Capacity (VA) : 700 | Output Voltage Regulation (Battery Mode) : 115V (+/- 5%) | PowerAlert Software : For local monitoring via the UPSâ„¢s built-in communication ports , download PowerAlert Local software at http://www.tripplite.com/poweralert | Relative Humidity : 0 to 95%, non-condensing | AC Suppression Joule Rating : 480 | Output Receptacle Details : Hospital grade output receptacles | AC Mode Efficiency Rating (100% Load) : 0.94 | Output Voltage Regulation (Line Mode) : -18%, +8% | Individually Controllable Load Banks : No | Rated input current (Maximum Load) : 5.5A | AC Suppression Response Time : Instantaneous | Output Isolation Transformer : Hospital grade load isolation transformer | Input Phase : Single-Phase | UPS Certifications : Meets FCC Part 15 Category A (EMI); Tested to CSA (Canada); Tested to UL1778 (USA); Tested to UL60601-1 (medical grade) | UPS Housing Material : PVC | Frequency Compatibility : 60 Hz | DC System Voltage (VDC) : 36 | Nominal Input Voltage(s) Supported : 120V AC | Output Receptacles : (4) 5-15R | Alarm Cancel Operation : Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status | Recommended Electrical Service : 15A 120V | Expandable Runtime : No | Audible Alarm : Audible alarm indicates power-failure, overload and low-battery conditions | Output AC Waveform (AC Mode) : Sine wave | Primary Form Factor : Tower | Installation Form Factors Supported with Optional Accessories : Wallmount (UPSWM - tower mounting kit) | UPS AC Suppression Joule Rating : 480 | UPS AC Suppression Response Time : Instantaneous | High Availability UPS Features : Hot swappable batteries | Communications Interface : USB; DB9 Serial | AC Mode BTU / Hr. (Full Load) : 97.7 | Output AC Waveform (Battery Mode) : PWM sine wave | Overvoltage Correction : Input voltages between 126 and 143 are reduced by 9% | Switches : 2 Switches control off/on power status and alarm-cancel/self-test operation | Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Output Watt Capacity (Watts) : 450 | Communications Cable : USB and DB9 serial cabling included | High Voltage Transfer to Battery Power (Setpoint) : 143 | Nominal Output Voltage(s) Supported : 115V; 120V | Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 81 to 143 | UPS Input Connection Type : 5-15P-HG | Input Circuit Breakers : 10A | Cooling Method : Fan | Battery Replacement Description : Hot-swappable, user replaceable batteries | Battery Access : Battery access door | Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported | EMI / RFI AC Noise Suppression : Yes | Undervoltage Correction : Input voltages between 96 and 106 are boosted by 10% | Grounding Lug : Grounding lug | Power Factor : 0.6 | Battery Mode BTU / Hr. (Full Load) : 189.1 | Battery Recharge Rate (Included Batteries) : Less than 4 hours from 10% to 90% | LED Indicators : 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status | Internal UPS Replacement Battery Cartridge : RBC36SLT | Form Factor : Tower | Network Management : SNMP Manageable | Certifications & Standards : UL1778 (USA, Series AGSM700PSR3HG), UL2601-1 (Medical), cUL (Canada), FCC Class A (emissions), Conforms to IEEE 587 / ANSI C62.41 specifications | USB : Yes | Package Contents : SmartPro 700HG UPS, SMART 700HG Medical Grade UPS System, One USB and One DB9 monitoring cable, Warranty information, Instruction manual | Battery Chemistry : Lead Acid | Maximum Operating Temperature : 104°F (40°C) | Product Name : SmartPro 700HG UPS | Product Line : SmartPro | Battery Life : 6 Year | Load Capacity : 700 VA/450 W | Status Indicators : 5 front-panel indicator LEDs to show battery charge level, AC line voltage levels, automatic voltage regulation status, UPS load level and replace battery warning | Alarm : Overload, On Battery, Low Battery | Hot Swappable : Yes | Typical Battery Recharge Time : 4 Hour | Receptacle Detail : 4 x NEMA 5-15R | Additional Information : Ideal UPS protection for applications in medical patient-care areas where UL2601-1 listed medical electrical equipment is required, Maintains less than 300 microamps leakage current for UPS and all connected equipment, Built-in isolation transformer with faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes, Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power, Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections, Full line isolation offers a higher degree of safety and prevents operational problems in sensitive electronic equipment, Resistant to electrostatic discharge, Supports loads up to 700VA / 450 watts, 42 minutes half load runtime (with 350VA load), 18 minutes full load runtime (with 700VA load), 4 protected hospital-grade outlets; 6-ft. cord, RS-232 and USB monitoring ports for remote monitoring and unattended shutdown, SNMP compatible with separate purchase SNMPWEBSOLO ethernet adapter accessory, PowerAlert unattended shutdown software available via free download from www.tripplite.com (cabling included), Complete surge protection, line isolation and EMI/RFI noise filtering, 2 year product warranty, 5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace, Battery replacement door, Grounding lug | Plug/Connector Type : NEMA 5-15P

Dimensions:

Depth : 9 in | Height : 13 in | Width : 8 in | Cord Length : 6 ft | Input Cord Length (ft.) : 6 | Primary UPS Depth (mm) : 229 | UPS Power Module Dimensions (hwd, in.) : 12.8 x 7.5 x 9 | Primary UPS Height (mm) : 325 | UPS Input Cord Length (ft.) : 6 | Primary UPS Width (mm) : 191